[virt-tools-list] RE: [Xen-devel] Virt-manager issue resolved

Caz Yokoyama cazyokoyama at gmail.com
Fri Nov 6 12:03:12 UTC 2009


Hello Fasiha,

[root at tragi caz]# iptables -F

[root at tragi caz]# iptables -L

Chain INPUT (policy ACCEPT)

target     prot opt source               destination         

 

Chain FORWARD (policy ACCEPT)

target     prot opt source               destination         

 

Chain OUTPUT (policy ACCEPT)

target     prot opt source               destination         

[root at tragi caz]# sh -x /etc/init.d/xend start

+ . /etc/rc.d/init.d/functions

++ TEXTDOMAIN=initscripts

++ umask 022

++ PATH=/sbin:/usr/sbin:/bin:/usr/bin

++ export PATH

++ '[' -z '' ']'

++ COLUMNS=80

++ '[' -z '' ']'

+++ /sbin/consoletype

++ CONSOLETYPE=pty

++ '[' -f /etc/sysconfig/i18n -a -z '' -a -z '' ']'

++ . /etc/profile.d/lang.sh

+++ sourced=0

+++ '[' -n en_US.UTF-8 ']'

+++ saved_lang=en_US.UTF-8

+++ '[' -f /root/.i18n ']'

+++ LANG=en_US.UTF-8

+++ unset saved_lang

+++ '[' 0 = 1 ']'

+++ unset sourced

+++ unset langfile

++ unset LANGSH_SOURCED

++ '[' -z '' ']'

++ '[' -f /etc/sysconfig/init ']'

++ . /etc/sysconfig/init

+++ BOOTUP=color

+++ RES_COL=60

+++ MOVE_TO_COL='echo -en \033[60G'

+++ SETCOLOR_SUCCESS='echo -en \033[0;32m'

+++ SETCOLOR_FAILURE='echo -en \033[0;31m'

+++ SETCOLOR_WARNING='echo -en \033[0;33m'

+++ SETCOLOR_NORMAL='echo -en \033[0;39m'

+++ LOGLEVEL=3

+++ PROMPT=yes

+++ AUTOSWAP=no

++ '[' pty = serial ']'

++
__sed_discard_ignored_files='/\(~\|\.bak\|\.orig\|\.rpmnew\|\.rpmorig\|\.rpm
save\)$/d'

+ '[' '!' -d /proc/xen ']'

+ grep -q control_d /proc/xen/capabilities

+ RETVAL=0

+ case "$1" in

+ start

+ echo -n 'Starting xend daemon: '

Starting xend daemon: + /usr/sbin/xend

+ RETVAL=1

+ test 1 = 0

+ echo_failure

+ '[' color = color ']'

+ echo -en '\033[60G'

                                                           + echo -n '['

[+ '[' color = color ']'

+ echo -en '\033[0;31m'

+ echo -n FAILED

FAILED+ '[' color = color ']'

+ echo -en '\033[0;39m'

+ echo -n ']'

]+ echo -ne '\r'

+ return 1

+ echo

 

+ '[' 1 -eq 0 ']'

+ exit 1

[root at tragi caz]# sh -x /etc/init.d/xendomains start

+ '[' -e /proc/xen/privcmd ']'

+ LOCKFILE=/var/lock/subsys/xendomains

+ XENDOM_CONFIG=/etc/sysconfig/xendomains

+ test -r /etc/sysconfig/xendomains

+ . /etc/sysconfig/xendomains

++ XENDOMAINS_SYSRQ=

++ XENDOMAINS_USLEEP=100000

++ XENDOMAINS_CREATE_USLEEP=5000000

++ XENDOMAINS_MIGRATE=

++ XENDOMAINS_SAVE=/var/lib/xen/save

++ XENDOMAINS_SHUTDOWN='--halt --wait'

++ XENDOMAINS_SHUTDOWN_ALL='--all --halt --wait'

++ XENDOMAINS_RESTORE=true

++ XENDOMAINS_AUTO=/etc/xen/auto

++ XENDOMAINS_AUTO_ONLY=false

++ XENDOMAINS_STOP_MAXWAIT=300

/etc/init.d/xendomains: line 125: syntax error near unexpected token `<'

/etc/init.d/xendomains: line 125: `     if test -z "$RUNLEVEL"; then read
RUNLEVEL REST < <(/sbin/runlevel); fi'

[root at tragi caz]# xm info

Error: Unable to connect to xend: No such file or directory. Is xend
running?

 

The line which produces syntax error above does not produces an error when
it is invoked manually. What xendomains do you have?

-caz

 

  _____  

From: Fasiha Ashraf [mailto:feehapk at yahoo.co.in] 
Sent: Thursday, November 05, 2009 10:42 PM
To: 'xen'; Caz Yokoyama
Cc: 'Fedora Xen'; virt-tools-list at redhat.com
Subject: RE: [Xen-devel] Virt-manager issue resolved

 


Try starting xend and xendomains after flushing iptable rules. #iptables -F
run
#iptables -F
then
#xend start
and then inside /etc/init.d
#./xendomains start
now to check whether xend is running or not. Use #xm info or #xm list

Regards,
Fasiha Ashraf

--- On Thu, 5/11/09, Caz Yokoyama <cazyokoyama at gmail.com> wrote:


From: Caz Yokoyama <cazyokoyama at gmail.com>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk at yahoo.co.in>, "'xen'"
<xen-devel at lists.xensource.com>
Cc: "'Fedora Xen'" <fedora-xen at redhat.com>, virt-tools-list at redhat.com
Date: Thursday, 5 November, 2009, 5:21 PM

Hello Fasiha,

[root at tragi caz]# iptables -L

Chain INPUT (policy ACCEPT)

target     prot opt source               destination         

ACCEPT     udp  --  anywhere             anywhere            udp dpt:domain 

ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:domain 

ACCEPT     udp  --  anywhere             anywhere            udp dpt:bootps 

ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:bootps 

ACCEPT     all  --  anywhere             anywhere            state
RELATED,ESTABLISHED 

ACCEPT     icmp --  anywhere             anywhere            

ACCEPT     all  --  anywhere             anywhere            

ACCEPT     tcp  --  anywhere             anywhere            state NEW tcp
dpt:ssh 

REJECT     all  --  anywhere             anywhere            reject-with
icmp-host-prohibited 

 

Chain FORWARD (policy ACCEPT)

target     prot opt source               destination         

ACCEPT     all  --  anywhere             192.168.122.0/24    state
RELATED,ESTABLISHED 

ACCEPT     all  --  192.168.122.0/24     anywhere            

ACCEPT     all  --  anywhere             anywhere            

REJECT     all  --  anywhere             anywhere            reject-with
icmp-port-unreachable 

REJECT     all  --  anywhere             anywhere            reject-with
icmp-port-unreachable 

REJECT     all  --  anywhere             anywhere            reject-with
icmp-host-prohibited 

 

Chain OUTPUT (policy ACCEPT)

target     prot opt source               destination         

Thank you.

-caz

 

  _____  

From: Fasiha Ashraf [mailto:feehapk at yahoo.co.in] 
Sent: Thursday, November 05, 2009 1:07 AM
To: 'xen'; Caz Yokoyama
Cc: virt-tools-list at redhat.com; 'Fedora Xen'
Subject: RE: [Xen-devel] Virt-manager issue resolved

 


Please send the output of #iptables -L

Regards,
Fasiha Ashraf

--- On Thu, 5/11/09, Caz Yokoyama <cazyokoyama at gmail.com> wrote:


From: Caz Yokoyama <cazyokoyama at gmail.com>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk at yahoo.co.in>, "'xen'"
<xen-devel at lists.xensource.com>
Cc: virt-tools-list at redhat.com, "'Fedora Xen'" <fedora-xen at redhat.com>
Date: Thursday, 5 November, 2009, 11:03 AM

Hello Fasiha,

Thank you for summarizing the procedure. I don't have xend running. Here is
the procedure I did.

Install Fedora 11 x86_64, full update.

su

yum install transfig texi2html libaio-devel dev86 glibc-devel.i586

yum install PyXML bridge-utils qemu-img qemu-common

wget
http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/5.fc12/src/xen-3.4.1-5.
fc12.src.rpm

rpm -ivh xen-3.4.1-5.fc12.src.rpm 

cd

cd rpmbuild/SPECS/

rpmbuild -bb xen.spec 

cd ~/rpmbuild/RPMS/x86_64

rpm -ivh *.rpm

cat > /etc/yum.repos.d/fedora-virt-preview.repo << EOF

[virt-preview]

name=Virtualization Rawhide for Fedora 11

baseurl=http://markmc.fedorapeople.org/virt-preview/f11/\$basearch/

enabled=1

gpgcheck=0

EOF

yum install libvirt libvirt-python python-virtinst virt-manager virt-viewer

rpm -qa | grep virt

cd virt-manager

git clone git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git
JeremyDom0

make menuconfig

make all

su

make modules_install install

reboot with xen

 

> Does "virsh list" work

# virsh list

error: Unable to connect to 'localhost:8000': Connection refused 

error: failed to connect to the hypervisor

 

"/etc/init.d/xend start" failed because /usr/sbin/xend returns 1.

 

Suggestion? I have attached .config.

-caz

 

  _____  

From: Fasiha Ashraf [mailto:feehapk at yahoo.co.in] 
Sent: Thursday, October 29, 2009 10:31 PM
To: 'xen'; Caz Yokoyama
Cc: virt-tools-list at redhat.com; 'Fedora Xen'
Subject: RE: [Xen-devel] Virt-manager issue resolved

 


 Latest virt-manager doesn't work with the previous version of libvirt on
fc11. You need to build xen and latest libvirt form rpm. Follow the steps
below.

 

Install packages required by rpmbuild:-
# yum install transfig texi2html libaio-devel dev86 glibc-devel.i586
Download xen-3.4.1-1.fc12.src.rpm
# wget
http://kojipkgs.fedoraproject.org/packages/xen/3.4.1/1.fc12/src/xen-3.4.1-1.
fc12.src.rpm
# rpm -iv xen-3.4.1-1.fc12.src.rpm
# cd /root/rpmbuild/SPECS
# rpmbuild -ba ./xen.spec
To install hypervisor and tools
# cd ../RPMS/x86_64
# yum install xen-3.4.1-1.fc11.x86_64.rpm \
xen-debuginfo-3.4.1-1.fc11.x86_64.rpm \
xen-devel-3.4.1-1.fc11.x86_64.rpm \
xen-doc-3.4.1-1.fc11.x86_64.rpm \
xen-hypervisor-3.4.1-1.fc11.x86_64.rpm \
xen-libs-3.4.1-1.fc11.x86_64.rpm \
xen-runtime-3.4.1-1.fc11.x86_64.rpm

To install new libvirt-0.7.0-6
# cat > /etc/yum.repos.d/fedora-virt-preview.repo << EOF
[virt-preview]
name=Virtualization Rawhide for Fedora 11
baseurl=http://markmc.fedorapeople.org/virt-preview/f11/\$basearch/
enabled=1
gpgcheck=0
EOF

# yum install libvirt libvirt-python python-virtinst \
virt-manager virt-viewer

# rpm -qa|grep virt

the following list must be there may be with higher version numbers.

libvirt-client-0.7.0-6.fc11.x86_64
libvirt-python-0.7.0-6.fc11.x86_64
virt-viewer-0.2.0-1.fc11.x86_64
virt-manager-0.7.0-5.fc11.x86_64
libvirt-0.7.0-6.fc11.x86_64
python-virtinst-0.500.0-1.fc11.noarch


All the above steps should be done on the base kernel. Now compile and build
xen with paravirt kernel. Now boot into the new xen kernel after starting
xend run this 

# xm info

to check. now you can use virt-manager in your set-up


Regards,
Fasiha Ashraf

--- On Thu, 29/10/09, Caz Yokoyama <cazyokoyama at gmail.com> wrote:


From: Caz Yokoyama <cazyokoyama at gmail.com>
Subject: RE: [Xen-devel] Virt-manager issue resolved
To: "'Fasiha Ashraf'" <feehapk at yahoo.co.in>, "'xen'"
<xen-devel at lists.xensource.com>
Cc: virt-tools-list at redhat.com, "'Fedora Xen'" <fedora-xen at redhat.com>
Date: Thursday, 29 October, 2009, 6:19 PM

Could you summarize the procedure? I am trying to run virt-manager on Fedora
11 with Xen-3.5-unstable and Jeremy's Dom0
(git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git). I am
wondering what option should be good on make on xen-3.5-unstable. I did

Make xen tools

Make install-xen install-tools

What else I need do?

Booting dom0 is fine.

-caz

  _____  

From: xen-devel-bounces at lists.xensource.com
[mailto:xen-devel-bounces at lists.xensource.com] On Behalf Of Fasiha Ashraf
Sent: Tuesday, October 27, 2009 4:49 AM
To: Cole Robinson; xen
Cc: Fedora Xen; virt-tools-list at redhat.com
Subject: [Xen-devel] Virt-manager issue resolved

 


I have got para-virt option enabled by installing vm using through http. the
problem was, i was trying to install it from DVD. Now the issue is it
doesn't find the file on the givern location although i can access them from
the same location in browser. PFA, the screen shots for the problem.

Regards
Fasiha Ashraf

--- On Mon, 26/10/09, Cole Robinson <crobinso at redhat.com> wrote:


From: Cole Robinson <crobinso at redhat.com>
Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not
found: xenUnifiedDomainLookupByName
To: "Fasiha Ashraf" <feehapk at yahoo.co.in>
Cc: virt-tools-list at redhat.com, bderzhavets at yahoo.com, "Xen users"
<james.harper at bendigoit.com.au>, "Fedora Xen" <fedora-xen at redhat.com>
Date: Monday, 26 October, 2009, 7:08 PM

On 10/26/2009 09:24 AM, Fasiha Ashraf wrote:
> It seem that its trying to install HVM guest that is not possible using
virt-manager.
> But you can see from the attached screen shot that virt type option is
disabled and i can't select paravirt from it. what should i do?
> here's the log .virt-manager/virt-manager.log
> 

Please include the other information I asked for:

virsh --connect xen:/// capabilities
virsh --connect xen:/// version

- Cole

> [Mon, 26 Oct 2009 16:11:51 virt-manager 3019] DEBUG (DistroInstaller:119)
DistroInstaller location is a local file/path: /dev/sr0
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (DistroInstaller:119)
DistroInstaller location is a local file/path: /dev/sr0
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (create:877) Default
storage path is: /var/lib/libvirt/images/f.img
> [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (VirtualDisk:737) Path
'/var/lib/libvirt/images' is target for pool 'default'. Creating volume
'f.img'.
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (DistroInstaller:119)
DistroInstaller location is a local file/path: /dev/sr0
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:877) Default
storage path is: /var/lib/libvirt/images/f.img
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (VirtualDisk:737) Path
'/var/lib/libvirt/images' is target for pool 'default'. Creating volume
'f.img'.
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1516) Creating
a VM f
>   Type: xen,hvm
>   UUID: 01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3
>   Install Source: /dev/sr0
>   OS: linux:fedora11
>   Kernel args: None
>   Memory: 512
>   Max Memory: 512
>   # VCPUs: 1
>   Filesize: 7.0
> [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1565) Starting
background install process
> [Mon, 26 Oct 2009 16:12:18 virt-manager 3019] DEBUG (Storage:950) Creating
storage volume 'f.img' with xml:
> <volume>
>   <name>f.img</name>
>   <capacity>7516192768</capacity>
>   <allocation>7516192768</allocation>
>   <target>
>     <format type='raw'/>
>   </target>
> </volume>
> [Mon, 26 Oct 2009 16:13:08 virt-manager 3019] DEBUG (Storage:973) Storage
volume 'f.img' install complete.
> [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (Guest:724) Creating
guest from:
> <domain type='xen'>
>   <name>f</name>
>   <currentMemory>524288</currentMemory>
>   <memory>524288</memory>
>   <uuid>01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3</uuid>
>   <os>
>     <type arch='x86_64'>hvm</type>
>     <loader>/usr/lib/xen/boot/hvmloader</loader>
>     <boot dev='cdrom'/>
>   </os>
>   <features>
>     <acpi/><apic/><pae/>
>   </features>
>   <clock offset="utc"/>
>   <on_poweroff>destroy</on_poweroff>
>   <on_reboot>destroy</on_reboot>
>   <on_crash>destroy</on_crash>
>   <vcpu>1</vcpu>
>   <devices>
>     <emulator>/usr/lib64/xen/bin/qemu-dm</emulator>
>     <disk type='file' device='disk'>
>       <source file='/var/lib/libvirt/images/f.img'/>
>       <target dev='hda' bus='ide'/>
>     </disk>
>     <disk type='block' device='cdrom'>
>       <source dev='/dev/sr0'/>
>       <target dev='hdc' bus='ide'/>
>       <readonly/>
>  </disk>
>     <interface type='bridge'>
>       <source bridge='eth0'/>
>       <mac address='00:16:36:08:9e:36'/>
>     </interface>
>     <input type='tablet' bus='usb'/>
>     <graphics type='vnc' port='-1'/>
>     <console type='pty'/>
>     <sound model='es1370'/>
>   </devices>
> </domain>
> 
> [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (netdevhelper:176)
Adding net device vif3.0 fe:ff:ff:ff:ff:ff /sys/class/net/vif3.0 (bridge:
None)
> [Mon, 26 Oct 2009 16:13:12 virt-manager 3019] DEBUG (engine:187) Tick is
slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:13 virt-manager 3019] DEBUG (engine:187) Tick is
slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:14 virt-manager 3019] DEBUG (engine:187) Tick is
slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:13:15 virt-manager 3019] DEBUG (engine:187) Tick is
slow, not running at requested rate.
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (netdevhelper:138)
Removing physical net device vif3.0 from list.
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (opticalhelper:205)
Optical device removed: /org/freedesktop/Hal/devices/net_fe_ff_ff_ff_ff_ff
> [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (error:76) Uncaught
Error: Unable to complete install: 'POST operation failed: xend_post: error
from xen $
> Traceback (most recent call last):
>   File "/usr/share/virt-manager/virtManager/create.py", line 1575, in
do_install
>     dom = guest.start_install(False, meter = meter)
>   File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in
start_install
> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in
start_install
>     return self._do_install(consolecb, meter, removeOld, wait)
>   File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, in
_do_install
>     self.domain = self.conn.createLinux(install_xml, 0)
>   File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in
createLinux
>     if ret is None:raise libvirtError('virDomainCreateLinux() failed',
conn=self)
> libvirtError: POST operation failed: xend_post: error from xen daemon:
<Fault 3: 'f'>
> '
> [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:377) window
counter decremented to 0
> [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:385) Exiting
app normally.
> 
> 
> 
> Fasiha Ashraf
> 
> --- On Mon, 26/10/09, Cole Robinson <crobinso at redhat.com> wrote:
> 
> From: Cole Robinson <crobinso at redhat.com>
> Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not
found: xenUnifiedDomainLookupByName
> To: "Fasiha Ashraf" <feehapk at yahoo.co.in>
> Cc: virt-tools-list at redhat.com, bderzhavets at yahoo.com, "Xen users"
<james.harper at bendigoit.com.au>, "Fedora Xen" <fedora-xen at redhat.com>
> Date: Monday, 26 October, 2009, 5:58 PM
> 
> On 10/26/2009 06:48 AM, Fasiha Ashraf wrote:
>> Hi all
>> I am facing this error while installing Guest VM on FC11 using
virt-manager
>> Unable to complete install '<class 'libvirt.libvirtError'> Domain not
found: xenUnifiedDomainLookupByName
>> Traceback (most recent call last):
>>    File "/usr/share/virt-manager/virtManager/create.py", line 1575, in
do_install
>>      dom = guest.start_install(False, meter = meter)
>>    File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628,
in start_install
>>      return self._do_install(consolecb, meter, removeOld, wait)
>>    File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726,
in _do_install
>>      self.domain = self.conn.createLinux(install_xml, 0)
>>    File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in
createLinux
>>      if ret is
>>   None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
>> libvirtError: Domain not found: xenUnifiedDomainLookupByName
>> '
>> What should i do to avoid it? please help!
>> Boris! How did you create PV guests using virt-manager i am following
your article 
>>
<http://bderzhavets.wordpress.com/2009/08/20/setup-libvirt-0-7-0-6-xen-3-4-1
-dom0-on-to-fedora-11-64-bit/#comment-623>
http://bderzhavets.wordpress.com/2009/08/20/setup-libvirt-0-7-0-6-xen-3-4-1-
dom0-on-to-fedora-11-64-bit/#comment-623
>> PFA, a screen-shot of the virt-manager
>>
>> Regards,
>> Fasiha Ashraf
>>
> 
> CCing fedora-xen list.
> 
> Rather than a screenshot, can you include:
> 
> ~/.virt-manager/virt-manager.log
> virsh --connect xen:/// capabilities
> virsh --connect xen:/// version
> 
> Thanks,
> Cole

 

  _____  

Yahoo! India has a new look.
<http://in.rd.yahoo.com/tagline_metro_2/*http:/in.yahoo.com/trynew> Take a
sneak peek.


-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel at lists.xensource.com
 <http://lists.xensource.com/xen-devel> http://lists.xensource.com/xen-devel

 

  _____  

Add whatever you love to the Yahoo! India homepage.
<http://in.rd.yahoo.com/tagline_metro_3/*http:/in.yahoo.com/trynew> Try now!

 

  _____  

Now, send attachments up to 25MB with Yahoo! India Mail.
<http://in.rd.yahoo.com/tagline_galaxy_2/*http:/in.overview.mail.yahoo.com/p
hotos> Learn how.


-----Inline Attachment Follows-----

_______________________________________________
Xen-devel mailing list
Xen-devel at lists.xensource.com
 <http://lists.xensource.com/xen-devel> http://lists.xensource.com/xen-devel





  _____  


Now, send attachments up to 25MB with Yahoo! India Mail.
<http://in.rd.yahoo.com/tagline_galaxy_2/*http:/in.overview.mail.yahoo.com/p
hotos> Learn how.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/virt-tools-list/attachments/20091106/7098523f/attachment.htm>


More information about the virt-tools-list mailing list