Warning : Failed to set up UEFI / The Libvirt version does not support UEFI / Install options are limited...
Pavel Hrdina
phrdina at redhat.com
Fri Aug 25 17:29:01 UTC 2023
On Fri, Aug 25, 2023 at 07:10:48PM +0200, Mario Marietto wrote:
> I've sent you an email on your personal email address because the ML does
> not accept pictures,but I need to show you a picture to help you to
> understand well. I don't approve this rule of the ML,it does not help those
> who want to learn and for this reason need to be exhaustive when there is a
> strong need to explain well.
Is your libvirtd running?
>
> On Fri, Aug 25, 2023 at 7:00 PM Mario Marietto <marietto2008 at gmail.com>
> wrote:
>
> > A progress,but it's not yet enough :
> >
> > [image: Screenshot from 2023-08-25 18-59-30.png]
> >
> > Unable to connect to libvirt qemu:///system.
> >
> > Failed to connect socket to '/var/local/run/libvirt/virtqemud-sock': No
> > such file or directory
> >
> > Libvirt URI is: qemu:///system
> >
> > Traceback (most recent call last):
> > File "/usr/local/share/virt-manager/virtManager/connection.py", line
> > 923, in _do_open
> > self._backend.open(cb, data)
> > File "/usr/local/share/virt-manager/virtinst/connection.py", line 171,
> > in open
> > conn = libvirt.openAuth(self._open_uri,
> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > File "/usr/lib/python3/dist-packages/libvirt.py", line 147, in openAuth
> > raise libvirtError('virConnectOpenAuth() failed')
> > libvirt.libvirtError: Failed to connect socket to
> > '/var/local/run/libvirt/virtqemud-sock': No such file or directory
> >
> > On Fri, Aug 25, 2023 at 6:53 PM Pavel Hrdina <phrdina at redhat.com> wrote:
> >
> >> On Fri, Aug 25, 2023 at 06:26:36PM +0200, Mario Marietto wrote:
> >> > root at chromarietto:/home/marietto# virt-manager
> >> > Traceback (most recent call last):
> >> > File "/usr/local/bin/virt-manager", line 6, in <module>
> >> > from virtManager import virtmanager
> >> > ModuleNotFoundError: No module named 'virtManager'
> >>
> >> Took me a bit to figure out but if you install virt-manager from sources
> >> you need to do this in from the source directory:
> >>
> >> ./setup.py configure --prefix=/usr/local
> >> sudo ./setup.py install
> >>
> >> Tested and works.
> >>
> >> > On Fri, Aug 25, 2023 at 6:21 PM Pavel Hrdina <phrdina at redhat.com>
> >> wrote:
> >> >
> >> > > On Fri, Aug 25, 2023 at 05:47:32PM +0200, Mario Marietto wrote:
> >> > > > ---> If you do only build-dep for libvirt you will have no
> >> virt-manager
> >> > > and
> >> > > > you would not be able to use it. You would have only libvirt.
> >> > > >
> >> > > > I don't want to use libvirt without the graphic frontend. It makes
> >> no
> >> > > > sense. At this point,if I can't use virt-manager,I would have used
> >> the
> >> > > qemu
> >> > > > parameters directly.
> >> > >
> >> > > Ok, I did not make myself clear in that case. The point is you still
> >> > > need to install virt-manager using package manager or get it from
> >> > > upstream.
> >> > >
> >> > > `apt build-dep` install packages that are required to build that
> >> package
> >> > > but will not install the package itself.
> >> > >
> >> > > `apt install` will install that package with all dependencies to use
> >> > > that package.
> >> > >
> >> > > The main difference is `to build` and `to run` the package.
> >> > >
> >> > > The issue with `apt install virt-manager` is that it will install also
> >> > > libvirt and qemu using package manager but you will not uses these
> >> > > installed libvirt and qemu as you are building your own.
> >> > >
> >> > > You can still definitely use virt-manager even if you build libvirt
> >> and
> >> > > qemu yourself, but you need to install it or get it some other way.
> >> > >
> >> > > Pavel
> >> > >
> >> > > >
> >> > > >
> >> > > > On Fri, Aug 25, 2023 at 3:50 PM Mario Marietto <
> >> marietto2008 at gmail.com>
> >> > > > wrote:
> >> > > >
> >> > > > > As normal user,instead,I don't see the previous errors,but
> >> > > virt-manager is
> >> > > > > missing :
> >> > > > >
> >> > > > > marietto at chromarietto:~$ libvirtd &
> >> > > > > [1] 1947
> >> > > > >
> >> > > > > marietto at chromarietto:~$ ps ax | grep libvirt
> >> > > > >
> >> > > > > 1947 pts/0 Sl 0:00 libvirtd
> >> > > > > 1974 pts/0 S+ 0:00 grep libvirt
> >> > > > >
> >> > > > > marietto at chromarietto:~$ virt-manager
> >> > > > > -bash: virt-manager: command not found
> >> > > > >
> >> > > > > On Fri, Aug 25, 2023 at 3:35 PM Mario Marietto <
> >> marietto2008 at gmail.com
> >> > > >
> >> > > > > wrote:
> >> > > > >
> >> > > > >> Finally we can understand well what's wrong :
> >> > > > >>
> >> > > > >> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0#
> >> libvirtd &
> >> > > > >>
> >> > > > >> [1] 1784
> >> > > > >>
> >> > > > >> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0#
> >> 2023-08-25
> >> > > > >> 13:32:41.245+0000: 1801: info : libvirt version: 9.7.0
> >> > > > >>
> >> > > > >> 2023-08-25 13:32:41.245+0000: 1801: info : hostname: chromarietto
> >> > > > >>
> >> > > > >> 2023-08-25 13:32:41.245+0000: 1801: error :
> >> > > > >> virFirewallApplyRuleDirect:518 : internal error: Failed to apply
> >> > > firewall
> >> > > > >> rules /usr/sbin/iptables -w --table mangle --list-rules: iptables
> >> > > v1.8.9
> >> > > > >> (legacy): can't initialize iptables table `mangle': Table does
> >> not
> >> > > exist
> >> > > > >> (do you need to insmod?)
> >> > > > >> Perhaps iptables or your kernel needs to be upgraded.
> >> > > > >>
> >> > > > >> 2023-08-25 13:32:41.263+0000: 1801: error :
> >> > > > >> virFirewallApplyRuleDirect:518 : internal error: Failed to apply
> >> > > firewall
> >> > > > >> rules /usr/sbin/ip6tables -w --table filter --list-rules:
> >> modprobe:
> >> > > FATAL:
> >> > > > >> Module ip6_tables not found in directory
> >> /lib/modules/5.4.244-stb-cbe
> >> > > > >> ip6tables v1.8.9 (legacy): can't initialize ip6tables table
> >> `filter':
> >> > > > >> Table does not exist (do you need to insmod?). Perhaps ip6tables
> >> or
> >> > > your
> >> > > > >> kernel needs to be upgraded.
> >> > > > >>
> >> > > > >> 2023-08-25 13:32:41.693+0000: 1801: error : virGetUserID:760 :
> >> invalid
> >> > > > >> argument: Failed to parse user 'libvirt-qemu'
> >> > > > >> 2023-08-25 13:32:41.699+0000: 1801: error :
> >> virStateInitialize:672 :
> >> > > > >> Initialization of QEMU state driver failed: invalid argument:
> >> Failed
> >> > > to
> >> > > > >> parse user 'libvirt-qemu'
> >> > > > >> 2023-08-25 13:32:41.699+0000: 1801: error :
> >> daemonRunStateInit:617 :
> >> > > > >> Driver state initialization failed
> >> > > > >>
> >> > > > >> On Fri, Aug 25, 2023 at 2:51 PM Mario Marietto <
> >> > > marietto2008 at gmail.com>
> >> > > > >> wrote:
> >> > > > >>
> >> > > > >>> it does not care,I solve it following this small tutorial :
> >> > > > >>>
> >> > > > >>> https://www.cnblogs.com/dream397/p/13850629.html
> >> > > > >>>
> >> > > > >>> thanks anyway. You are very gentle with me.
> >> > > > >>>
> >> > > > >>> On Fri, Aug 25, 2023 at 2:39 PM Mario Marietto <
> >> > > marietto2008 at gmail.com>
> >> > > > >>> wrote:
> >> > > > >>>
> >> > > > >>>> On Debian bookworm I get a compilation error,but not on Devuan
> >> :
> >> > > > >>>>
> >> > > > >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0#
> >> > > ./configure
> >> > > > >>>> --disable-werror --target-list=arm-softmmu --enable-opengl
> >> > > --enable-gtk
> >> > > > >>>> --enable-kvm --enable-guest-agent --enable-spice
> >> > > --audio-drv-list="oss pa"
> >> > > > >>>> --enable-libusb --enable-trace-backend=simple --enable-debug
> >> > > > >>>> --prefix=/usr/local
> >> > > > >>>>
> >> > > > >>>> Install prefix /usr/local
> >> > > > >>>> BIOS directory /usr/local/share/qemu
> >> > > > >>>> firmware path /usr/local/share/qemu-firmware
> >> > > > >>>> binary directory /usr/local/bin
> >> > > > >>>> library directory /usr/local/lib
> >> > > > >>>> module directory /usr/local/lib/qemu
> >> > > > >>>> libexec directory /usr/local/libexec
> >> > > > >>>> include directory /usr/local/include
> >> > > > >>>> config directory /usr/local/etc
> >> > > > >>>> local state directory /usr/local/var
> >> > > > >>>> Manual directory /usr/local/share/man
> >> > > > >>>> ELF interp prefix /usr/gnemul/qemu-%M
> >> > > > >>>> Build directory /home/marietto/Desktop/Dati/qemu-v5.1.0
> >> > > > >>>> Source path /home/marietto/Desktop/Dati/qemu-v5.1.0
> >> > > > >>>> GIT binary git
> >> > > > >>>> GIT submodules ui/keycodemapdb tests/fp/berkeley-testfloat-3
> >> > > > >>>> tests/fp/berkeley-softfloat-3 dtc capstone slirp
> >> > > > >>>> C compiler cc
> >> > > > >>>> Host C compiler cc
> >> > > > >>>> C++ compiler c++
> >> > > > >>>> Objective-C compiler cc
> >> > > > >>>> ARFLAGS rv
> >> > > > >>>> CFLAGS -g
> >> > > > >>>> QEMU_CFLAGS -I/usr/include/pixman-1
> >> -I$(SRC_PATH)/dtc/libfdt
> >> > > > >>>> -pthread -I/usr/include/glib-2.0
> >> -I/usr/lib/arm-linux-gnueabihf/gl
> >> > > > >>>> ib-2.0/include -fPIE -DPIE -D_GNU_SOURCE
> >> -D_FILE_OFFSET_BITS=64
> >> > > > >>>> -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall
> >> > > -Wund
> >> > > > >>>> ef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing
> >> > > > >>>> -fno-common -fwrapv -std=gnu99 -Wold-style-declaration
> >> > > -Wold-style-defini
> >> > > > >>>> tion -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self
> >> > > > >>>> -Wignored-qualifiers -Wempty-body -Wnested-externs
> >> -Wendif-labels
> >> > > -Wexpan
> >> > > > >>>> sion-to-defined -Wno-missing-include-dirs
> >> -Wno-shift-negative-value
> >> > > > >>>> -Wno-psabi -fstack-protector-strong
> >> -I/usr/include/p11-kit-1 -D
> >> > > > >>>> STRUCT_IOVEC_DEFINED -I/usr/include/libpng16
> >> > > -I/usr/include/spice-1
> >> > > > >>>> -I/usr/include/spice-server -I$(SRC_PATH)/capstone/include
> >> > > > >>>> QEMU_LDFLAGS -L$(BUILD_DIR)/dtc/libfdt -Wl,--warn-common
> >> > > > >>>> -Wl,-z,relro -Wl,-z,now -pie -fstack-protector-strong
> >> > > > >>>> make make
> >> > > > >>>> install install
> >> > > > >>>> python /usr/bin/python3 -B (3.11.2)
> >> > > > >>>> genisoimage
> >> > > > >>>> efi_aarch64
> >> > > > >>>>
> >> > > /home/marietto/Desktop/Dati/qemu-v5.1.0/pc-bios/edk2-aarch64-code.fd
> >> > > > >>>> python_yaml no
> >> > > > >>>> slirp support git
> >> > > > >>>> smbd /usr/sbin/smbd
> >> > > > >>>> module support no
> >> > > > >>>> alt path mod load no
> >> > > > >>>> host CPU arm
> >> > > > >>>> host big endian no
> >> > > > >>>> target list arm-softmmu
> >> > > > >>>> gprof enabled no
> >> > > > >>>> sparse enabled no
> >> > > > >>>> strip binaries no
> >> > > > >>>> profiler no
> >> > > > >>>> static build no
> >> > > > >>>> safe stack no
> >> > > > >>>> SDL support no
> >> > > > >>>> SDL image support no
> >> > > > >>>> GTK support yes (3.24.37)
> >> > > > >>>> GTK GL support yes
> >> > > > >>>> VTE support no
> >> > > > >>>> TLS priority NORMAL
> >> > > > >>>> GNUTLS support yes
> >> > > > >>>> libgcrypt no
> >> > > > >>>> nettle yes (3.8.1)
> >> > > > >>>> XTS yes
> >> > > > >>>> libtasn1 yes
> >> > > > >>>> PAM no
> >> > > > >>>> iconv support yes
> >> > > > >>>> curses support yes
> >> > > > >>>> virgl support no
> >> > > > >>>> curl support yes
> >> > > > >>>> mingw32 support no
> >> > > > >>>> Audio drivers oss pa
> >> > > > >>>> Block whitelist (rw)
> >> > > > >>>> Block whitelist (ro)
> >> > > > >>>> VirtFS support yes
> >> > > > >>>> Multipath support no
> >> > > > >>>> VNC support yes
> >> > > > >>>> VNC SASL support yes
> >> > > > >>>> VNC JPEG support yes
> >> > > > >>>> VNC PNG support yes
> >> > > > >>>> xen support yes
> >> > > > >>>> xen ctrl version 41700
> >> > > > >>>> brlapi support no
> >> > > > >>>> Documentation no
> >> > > > >>>> PIE yes
> >> > > > >>>> vde support no
> >> > > > >>>> netmap support no
> >> > > > >>>> Linux AIO support no
> >> > > > >>>> Linux io_uring support no
> >> > > > >>>> ATTR/XATTR support yes
> >> > > > >>>> Install blobs yes
> >> > > > >>>> KVM support yes
> >> > > > >>>> HAX support no
> >> > > > >>>> HVF support no
> >> > > > >>>> WHPX support no
> >> > > > >>>> TCG support yes
> >> > > > >>>> TCG debug enabled yes
> >> > > > >>>> TCG interpreter no
> >> > > > >>>> malloc trim support yes
> >> > > > >>>> RDMA support no
> >> > > > >>>> PVRDMA support no
> >> > > > >>>> fdt support git
> >> > > > >>>> membarrier no
> >> > > > >>>> preadv support yes
> >> > > > >>>> fdatasync yes
> >> > > > >>>> madvise yes
> >> > > > >>>> posix_madvise yes
> >> > > > >>>> posix_memalign yes
> >> > > > >>>> libcap-ng support yes
> >> > > > >>>> vhost-net support yes
> >> > > > >>>> vhost-crypto support yes
> >> > > > >>>> vhost-scsi support yes
> >> > > > >>>> vhost-vsock support yes
> >> > > > >>>> vhost-user support yes
> >> > > > >>>> vhost-user-fs support yes
> >> > > > >>>> vhost-vdpa support yes
> >> > > > >>>> Trace backends simple
> >> > > > >>>> Trace output file trace-<pid>
> >> > > > >>>> spice support yes (0.14.3/0.15.1)
> >> > > > >>>> rbd support yes
> >> > > > >>>> xfsctl support no
> >> > > > >>>> smartcard support no
> >> > > > >>>> libusb yes
> >> > > > >>>> usb net redir no
> >> > > > >>>> OpenGL support yes
> >> > > > >>>> OpenGL dmabufs yes
> >> > > > >>>> libiscsi support yes
> >> > > > >>>> libnfs support no
> >> > > > >>>> build guest agent yes
> >> > > > >>>> QGA VSS support no
> >> > > > >>>> QGA w32 disk info no
> >> > > > >>>> QGA MSI support no
> >> > > > >>>> seccomp support no
> >> > > > >>>> coroutine backend ucontext
> >> > > > >>>> coroutine pool yes
> >> > > > >>>> debug stack usage no
> >> > > > >>>> mutex debugging yes
> >> > > > >>>> crypto afalg no
> >> > > > >>>> GlusterFS support yes
> >> > > > >>>> gcov gcov
> >> > > > >>>> gcov enabled no
> >> > > > >>>> TPM support yes
> >> > > > >>>> libssh support yes
> >> > > > >>>> QOM debugging yes
> >> > > > >>>> Live block migration yes
> >> > > > >>>> lzo support no
> >> > > > >>>> snappy support no
> >> > > > >>>> bzip2 support no
> >> > > > >>>> lzfse support no
> >> > > > >>>> zstd support yes
> >> > > > >>>> NUMA host support yes
> >> > > > >>>> libxml2 yes
> >> > > > >>>> tcmalloc support no
> >> > > > >>>> jemalloc support no
> >> > > > >>>> avx2 optimization
> >> > > > >>>> avx512f optimization no
> >> > > > >>>> replication support yes
> >> > > > >>>> bochs support yes
> >> > > > >>>> cloop support yes
> >> > > > >>>> dmg support yes
> >> > > > >>>> qcow v1 support yes
> >> > > > >>>> vdi support yes
> >> > > > >>>> vvfat support yes
> >> > > > >>>> qed support yes
> >> > > > >>>> parallels support yes
> >> > > > >>>> sheepdog support yes
> >> > > > >>>> capstone git
> >> > > > >>>> libpmem support no
> >> > > > >>>> libdaxctl support no
> >> > > > >>>> libudev yes
> >> > > > >>>> default devices yes
> >> > > > >>>> plugin support no
> >> > > > >>>> fuzzing support no
> >> > > > >>>> gdb
> >> > > > >>>> rng-none no
> >> > > > >>>> Linux keyring yes
> >> > > > >>>> cross containers no
> >> > > > >>>>
> >> > > > >>>> NOTE: guest cross-compilers enabled: cc
> >> > > > >>>>
> >> > > > >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# apt
> >> > > install
> >> > > > >>>> libfdt-dev libdt-utils-dev python3-libfdt
> >> > > > >>>>
> >> > > > >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0#
> >> make
> >> > > > >>>>
> >> > > > >>>> GEN arm-softmmu/config-devices.mak.tmp
> >> > > > >>>> GEN arm-softmmu/config-devices.mak
> >> > > > >>>> GEN config-all-devices.mak
> >> > > > >>>> GEN config-host.h
> >> > > > >>>> make[1]: Entering directory
> >> > > > >>>> '/home/marietto/Desktop/Dati/qemu-v5.1.0/slirp'
> >> > > > >>>> make[1]: Nothing to be done for 'all'.
> >> > > > >>>> make[1]: Leaving directory
> >> > > > >>>> '/home/marietto/Desktop/Dati/qemu-v5.1.0/slirp'
> >> > > > >>>> make[1]: *** No rule to make target
> >> > > > >>>> '/root/Desktop/qemu-v5.1.0/dtc/libfdt/fdt.h', needed by
> >> > > 'libfdt/fdt.o'.
> >> > > > >>>> Stop.
> >> > > > >>>> make: *** [Makefile:536: dtc/all] Error 2
> >> > > > >>>>
> >> > > > >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0# cd
> >> dtc
> >> > > > >>>>
> >> > > > >>>> root at chromarietto:/home/marietto/Desktop/Dati/qemu-v5.1.0/dtc#
> >> cd
> >> > > > >>>> libfdt
> >> > > > >>>>
> >> > > > >>>> root at chromarietto
> >> > > :/home/marietto/Desktop/Dati/qemu-v5.1.0/dtc/libfdt#
> >> > > > >>>> ls
> >> > > > >>>>
> >> > > > >>>> fdt_addresses.c fdt_check.d fdt_empty_tree.o
> >> fdt_overlay.o
> >> > > > >>>> fdt_rw.d fdt_sw.c fdt_wip.o Makefile.libfdt
> >> > > > >>>> fdt_addresses.d fdt_check.o fdt.h fdt_ro.c
> >> > > > >>>> fdt_rw.o fdt_sw.d libfdt.a TODO
> >> > > > >>>> fdt_addresses.o fdt.d fdt.o fdt_ro.d
> >> > > > >>>> fdt_strerror.c fdt_sw.o libfdt_env.h version.lds
> >> > > > >>>> fdt.c fdt_empty_tree.c fdt_overlay.c fdt_ro.o
> >> > > > >>>> fdt_strerror.d fdt_wip.c libfdt.h
> >> > > > >>>> fdt_check.c fdt_empty_tree.d fdt_overlay.d fdt_rw.c
> >> > > > >>>> fdt_strerror.o fdt_wip.d libfdt_internal.h
> >> > > > >>>>
> >> > > > >>>>
> >> > > > >>>>
> >> > > > >>>> On Fri, Aug 25, 2023 at 10:51 AM Pavel Hrdina <
> >> phrdina at redhat.com>
> >> > > > >>>> wrote:
> >> > > > >>>>
> >> > > > >>>>> On Thu, Aug 24, 2023 at 10:40:40PM +0200, Mario Marietto
> >> wrote:
> >> > > > >>>>> > I've installed Debian bookworm instead of devuan. Maybe it's
> >> > > > >>>>> easier,since I
> >> > > > >>>>> > know debian better than devuan. Let me understand a point :
> >> > > should I
> >> > > > >>>>> issue
> >> > > > >>>>> > "apt build-dep libvirt" instead of "apt install
> >> virt-manager" ?
> >> > > > >>>>> aren't they
> >> > > > >>>>> > equivalent commands ? Usually,as soon as I reinstall
> >> Debian,I do
> >> > > the
> >> > > > >>>>> > installation of virt-manager and it grabs all its
> >> dependencies.
> >> > > If I
> >> > > > >>>>> > understand correctly,I should not install virt-manager and
> >> its
> >> > > > >>>>> > dependencies,right ? thanks.
> >> > > > >>>>>
> >> > > > >>>>> If you run `apt install virt-manager` it will install
> >> virt-manager,
> >> > > > >>>>> libvirt, qemu and everything needed to run and use the
> >> software.
> >> > > > >>>>> If you run `apt build-dep libvirt` it will install everything
> >> > > needed to
> >> > > > >>>>> compile libvirt but not necessarily everything you need to
> >> > > actually run
> >> > > > >>>>> it. If you do only build-dep for libvirt you will have no
> >> > > virt-manager
> >> > > > >>>>> and you would not be able to use it. You would have only
> >> libvirt.
> >> > > > >>>>>
> >> > > > >>>>> > On Thu, Aug 24, 2023 at 3:16 PM Pavel Hrdina <
> >> phrdina at redhat.com
> >> > > >
> >> > > > >>>>> wrote:
> >> > > > >>>>> >
> >> > > > >>>>> > > On Wed, Aug 23, 2023 at 08:47:55PM +0200, Mario Marietto
> >> wrote:
> >> > > > >>>>> > > > I've fixed this problem :
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > virsh: /lib/arm-linux-gnueabihf/libvirt.so.0: version
> >> > > > >>>>> > > > `LIBVIRT_PRIVATE_9.0.0' not found (required by virsh)
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > now,virsh works if I launch it within the build
> >> directory of
> >> > > > >>>>> libvirt :
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > root at devuan:~/libvirt_build/bin# ./virsh
> >> > > > >>>>> > > > Welcome to virsh, the virtualization interactive
> >> terminal.
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > Type: 'help' for help with commands
> >> > > > >>>>> > > > 'quit' to quit
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > but inside the build directory of libvirt I don't see
> >> any
> >> > > > >>>>> virt-manager
> >> > > > >>>>> > > > executable,so I'm forced to run it like this :
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > root at devuan:~/Desktop/libvirt/build# ./run
> >> > > /usr/bin/virt-manager
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > and it gives the previous error : no connection driver
> >> > > available
> >> > > > >>>>> for
> >> > > > >>>>> > > > qemu:///system
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > but the fact that virsh works is a progress ? should I
> >> > > compile
> >> > > > >>>>> > > virt-manager
> >> > > > >>>>> > > > also from source code ?
> >> > > > >>>>> > >
> >> > > > >>>>> > > No, there is no need to compile virt-manager, it is
> >> written in
> >> > > > >>>>> python
> >> > > > >>>>> > > and so there is no compilation involved at all.
> >> > > > >>>>> > >
> >> > > > >>>>> > >
> >> > > > >>>>> > > I would probably recommend you to remove
> >> `~/libvirt_build/` and
> >> > > > >>>>> > > `~/Desktop/libvirt/build/` directories and start again.
> >> > > > >>>>> > >
> >> > > > >>>>> > > If you've successfully installed all libvirt build
> >> dependencies
> >> > > > >>>>> using
> >> > > > >>>>> > > `apt build-dep libvirt` you should have everything to
> >> build
> >> > > your
> >> > > > >>>>> own
> >> > > > >>>>> > > libvirt if you are on Devuan 5.
> >> > > > >>>>> > >
> >> > > > >>>>> > > The next step would be configuring libvirt so you can
> >> compile
> >> > > it
> >> > > > >>>>> using
> >> > > > >>>>> > > the following command executed in the libvirt source
> >> directory:
> >> > > > >>>>> > >
> >> > > > >>>>> > > meson setup build
> >> > > > >>>>> > >
> >> > > > >>>>> > > Once that is completed you can build and install your
> >> libvirt
> >> > > using
> >> > > > >>>>> > > the following command directly from the source directory
> >> as
> >> > > well:
> >> > > > >>>>> > >
> >> > > > >>>>> > > ninja -C build
> >> > > > >>>>> > > sudo ninja -C build install
> >> > > > >>>>> > >
> >> > > > >>>>> > > The first one will build libvirt (I would not run it as
> >> root)
> >> > > and
> >> > > > >>>>> the
> >> > > > >>>>> > > second one will install it into /usr/local/.
> >> > > > >>>>> > >
> >> > > > >>>>> > > After that is done you should be able to run virsh and
> >> libvirtd
> >> > > > >>>>> directly
> >> > > > >>>>> > > without any run script. You can verify which binary is
> >> actually
> >> > > > >>>>> used if
> >> > > > >>>>> > > you run the following:
> >> > > > >>>>> > >
> >> > > > >>>>> > > which virsh
> >> > > > >>>>> > > which libvirtd
> >> > > > >>>>> > >
> >> > > > >>>>> > > If everything is correct you should get these paths:
> >> > > > >>>>> > >
> >> > > > >>>>> > > /usr/local/bin/virsh
> >> > > > >>>>> > > /usr/local/sbin/libvirtd
> >> > > > >>>>> > >
> >> > > > >>>>> > > Now you should be able to simply run `libvirtd &` to
> >> start the
> >> > > > >>>>> daemon.
> >> > > > >>>>> > >
> >> > > > >>>>> > > After that running `virsh version` or any virsh command
> >> should
> >> > > just
> >> > > > >>>>> > > work. Running `virt-manager` should also work and connect
> >> to
> >> > > the
> >> > > > >>>>> correct
> >> > > > >>>>> > > libvirt.
> >> > > > >>>>> > >
> >> > > > >>>>> > >
> >> > > > >>>>> > > I also tried installing QEMU build dependencies using `apt
> >> > > > >>>>> build-dep qemu`
> >> > > > >>>>> > > and used the following steps to build QEMU 5.1.0 from
> >> source
> >> > > > >>>>> directory:
> >> > > > >>>>> > >
> >> > > > >>>>> > > mkdir build
> >> > > > >>>>> > > cd build
> >> > > > >>>>> > > ../configure (with options, I'm doing it on x86_64 so
> >> they
> >> > > are
> >> > > > >>>>> bit
> >> > > > >>>>> > > different)
> >> > > > >>>>> > > make
> >> > > > >>>>> > > sudo make install
> >> > > > >>>>> > >
> >> > > > >>>>> > > But you should have theses steps completed already. Again
> >> you
> >> > > can
> >> > > > >>>>> verify
> >> > > > >>>>> > > that you are using correct qemu-system-arm running:
> >> > > > >>>>> > >
> >> > > > >>>>> > > which qemu-system-arm
> >> > > > >>>>> > >
> >> > > > >>>>> > > where you should get
> >> > > > >>>>> > >
> >> > > > >>>>> > > /usr/local/bin/qemu-system-arm
> >> > > > >>>>> > >
> >> > > > >>>>> > > If you complete all of the build and install steps like
> >> here
> >> > > and
> >> > > > >>>>> start
> >> > > > >>>>> > > libvirtd after that you should have everything set to work
> >> > > properly
> >> > > > >>>>> > > and starting `virt-manager` without any special path
> >> should
> >> > > just
> >> > > > >>>>> work.
> >> > > > >>>>> > >
> >> > > > >>>>> > > I verified all of this on Devuan 5 but on x86_64
> >> architecture,
> >> > > > >>>>> don't
> >> > > > >>>>> > > have any 32bit arm to try it on.
> >> > > > >>>>> > >
> >> > > > >>>>> > > Pavel
> >> > > > >>>>> > >
> >> > > > >>>>> > >
> >> > > > >>>>> > > > On Wed, Aug 23, 2023 at 7:39 PM Mario Marietto <
> >> > > > >>>>> marietto2008 at gmail.com>
> >> > > > >>>>> > > > wrote:
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > > Despite that error,the previous error is still there :
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > > Unable to connect to libvirt qemu:///system.
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > > no connection driver available for qemu:///system
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > > Libvirt URI is: qemu:///system
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > > Traceback (most recent call last):
> >> > > > >>>>> > > > > File
> >> "/usr/share/virt-manager/virtManager/connection.py",
> >> > > > >>>>> line 923,
> >> > > > >>>>> > > in
> >> > > > >>>>> > > > > _do_open
> >> > > > >>>>> > > > > self._backend.open(cb, data)
> >> > > > >>>>> > > > > File
> >> "/usr/share/virt-manager/virtinst/connection.py",
> >> > > line
> >> > > > >>>>> 171, in
> >> > > > >>>>> > > open
> >> > > > >>>>> > > > > conn = libvirt.openAuth(self._open_uri,
> >> > > > >>>>> > > > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >> > > > >>>>> > > > > File "/usr/lib/python3/dist-packages/libvirt.py",
> >> line
> >> > > 147,
> >> > > > >>>>> in
> >> > > > >>>>> > > openAuth
> >> > > > >>>>> > > > > raise libvirtError('virConnectOpenAuth() failed')
> >> > > > >>>>> > > > > libvirt.libvirtError: no connection driver available
> >> for
> >> > > > >>>>> qemu:///system
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > > I'm using qemu 5.1 :
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > > root at devuan:~# qemu-system-arm --version
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > > QEMU emulator version 5.1.0 (v5.1.0-dirty)
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > > On Wed, Aug 23, 2023 at 7:30 PM Mario Marietto <
> >> > > > >>>>> marietto2008 at gmail.com
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > > wrote:
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > >> root at devuan:~/Desktop/libvirt/build# sudo virsh list
> >> > > --all
> >> > > > >>>>> > > > >>
> >> > > > >>>>> > > > >> virsh: /lib/arm-linux-gnueabihf/libvirt.so.0: version
> >> > > > >>>>> > > > >> `LIBVIRT_PRIVATE_9.0.0' not found (required by virsh)
> >> > > > >>>>> > > > >>
> >> > > > >>>>> > > > >>
> >> > > > >>>>> > > > >>
> >> > > > >>>>> > > > >> On Wed, Aug 23, 2023 at 5:43 PM Pavel Hrdina <
> >> > > > >>>>> phrdina at redhat.com>
> >> > > > >>>>> > > wrote:
> >> > > > >>>>> > > > >>
> >> > > > >>>>> > > > >>> On Wed, Aug 23, 2023 at 03:41:42PM +0200, Mario
> >> Marietto
> >> > > > >>>>> wrote:
> >> > > > >>>>> > > > >>> > Hello Pavel,
> >> > > > >>>>> > > > >>> >
> >> > > > >>>>> > > > >>> > It didn't work,but the error was changed. Isn't a
> >> bad
> >> > > news
> >> > > > >>>>> :
> >> > > > >>>>> > > > >>> >
> >> > > > >>>>> > > > >>> > root at devuan:~/Desktop/libvirt/build# ./run
> >> > > > >>>>> /usr/bin/virt-manager
> >> > > > >>>>> > > > >>> >
> >> > > > >>>>> > > > >>> > Unable to connect to libvirt qemu:///system.
> >> > > > >>>>> > > > >>> >
> >> > > > >>>>> > > > >>> > no connection driver available for qemu:///system
> >> > > > >>>>> > > > >>> >
> >> > > > >>>>> > > > >>> > Libvirt URI is: qemu:///system
> >> > > > >>>>> > > > >>> >
> >> > > > >>>>> > > > >>> > Traceback (most recent call last):
> >> > > > >>>>> > > > >>> > File
> >> > > > >>>>> "/usr/share/virt-manager/virtManager/connection.py", line
> >> > > > >>>>> > > 923,
> >> > > > >>>>> > > > >>> in
> >> > > > >>>>> > > > >>> > _do_open
> >> > > > >>>>> > > > >>> > self._backend.open(cb, data)
> >> > > > >>>>> > > > >>> > File
> >> > > "/usr/share/virt-manager/virtinst/connection.py",
> >> > > > >>>>> line 171,
> >> > > > >>>>> > > in
> >> > > > >>>>> > > > >>> open
> >> > > > >>>>> > > > >>> > conn = libvirt.openAuth(self._open_uri,
> >> > > > >>>>> > > > >>> > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >> > > > >>>>> > > > >>> > File
> >> "/usr/lib/python3/dist-packages/libvirt.py",
> >> > > line
> >> > > > >>>>> 147, in
> >> > > > >>>>> > > > >>> openAuth
> >> > > > >>>>> > > > >>> > raise libvirtError('virConnectOpenAuth()
> >> failed')
> >> > > > >>>>> > > > >>> > libvirt.libvirtError: no connection driver
> >> available
> >> > > for
> >> > > > >>>>> > > qemu:///system
> >> > > > >>>>> > > > >>>
> >> > > > >>>>> > > > >>> Seems like you've compiled libvirt without qemu
> >> support.
> >> > > My
> >> > > > >>>>> guess is
> >> > > > >>>>> > > > >>> that you are missing dependencies to compile
> >> libvirt with
> >> > > > >>>>> QEMU
> >> > > > >>>>> > > driver.
> >> > > > >>>>> > > > >>> If you run
> >> > > > >>>>> > > > >>>
> >> > > > >>>>> > > > >>> apt build-dep libvirt
> >> > > > >>>>> > > > >>>
> >> > > > >>>>> > > > >>> it should install you dependencies that libvirt from
> >> > > package
> >> > > > >>>>> manager
> >> > > > >>>>> > > > >>> would need and that is a good starting point to
> >> compile
> >> > > your
> >> > > > >>>>> own
> >> > > > >>>>> > > > >>> libvirt.
> >> > > > >>>>> > > > >>>
> >> > > > >>>>> > > > >>>
> >> > > > >>>>> > > > >>> > On Wed, Aug 23, 2023 at 2:27 PM Pavel Hrdina <
> >> > > > >>>>> phrdina at redhat.com>
> >> > > > >>>>> > > > >>> wrote:
> >> > > > >>>>> > > > >>> >
> >> > > > >>>>> > > > >>> > > On Tue, Aug 22, 2023 at 10:23:32PM +0200, Mario
> >> > > Marietto
> >> > > > >>>>> wrote:
> >> > > > >>>>> > > > >>> > > > After having compiled libvirt from src and
> >> having
> >> > > run
> >> > > > >>>>> > > > >>> virt-manager,I get
> >> > > > >>>>> > > > >>> > > > the error "Libvirtd daemon is not running".
> >> Can you
> >> > > > >>>>> give a
> >> > > > >>>>> > > look at
> >> > > > >>>>> > > > >>> this
> >> > > > >>>>> > > > >>> > > > picture ?
> >> > > > >>>>> > > > >>> > > >
> >> > > > >>>>> > > > >>> > > > https://ibb.co/n6MvDbL
> >> > > > >>>>> > > > >>> > > >
> >> > > > >>>>> > > > >>> > > > how to fix it ? thanks.
> >> > > > >>>>> > > > >>> > >
> >> > > > >>>>> > > > >>> > > If you managed to start libvirtd using the run
> >> script
> >> > > > >>>>> from
> >> > > > >>>>> > > libvirt
> >> > > > >>>>> > > > >>> build
> >> > > > >>>>> > > > >>> > > directory you should use the run script to start
> >> > > > >>>>> virt-manager as
> >> > > > >>>>> > > > >>> well.
> >> > > > >>>>> > > > >>> > >
> >> > > > >>>>> > > > >>> > > > On Tue, Aug 22, 2023 at 10:17 PM Mario
> >> Marietto <
> >> > > > >>>>> > > > >>> marietto2008 at gmail.com>
> >> > > > >>>>> > > > >>> > > > wrote:
> >> > > > >>>>> > > > >>> > > >
> >> > > > >>>>> > > > >>> > > > > [image: Screenshot from 2023-08-22
> >> 22-06-30.png]
> >> > > > >>>>> > > > >>> > > > >
> >> > > > >>>>> > > > >>> > > > > On Tue, Aug 22, 2023 at 9:44 PM Mario
> >> Marietto <
> >> > > > >>>>> > > > >>> marietto2008 at gmail.com
> >> > > > >>>>> > > > >>> > > >
> >> > > > >>>>> > > > >>> > > > > wrote:
> >> > > > >>>>> > > > >>> > > > >
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >> Hello,
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >> Pavel,are you there ? Please help me to
> >> give it
> >> > > the
> >> > > > >>>>> last
> >> > > > >>>>> > > push.
> >> > > > >>>>> > > > >>> I've
> >> > > > >>>>> > > > >>> > > fixed
> >> > > > >>>>> > > > >>> > > > >> the last error like so :
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >> root at devuan:~/Desktop/libvirt/build#
> >> > > > >>>>> update-alternatives
> >> > > > >>>>> > > --set
> >> > > > >>>>> > > > >>> > > iptables
> >> > > > >>>>> > > > >>> > > > >> /usr/sbin/iptables-legacy
> >> > > > >>>>> > > > >>> > > > >> update-alternatives: using
> >> > > > >>>>> /usr/sbin/iptables-legacy to
> >> > > > >>>>> > > provide
> >> > > > >>>>> > > > >>> > > > >> /usr/sbin/iptables (iptables) in manual
> >> mode
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >> but now I have got another error. Anyway,I
> >> feel
> >> > > to
> >> > > > >>>>> be close
> >> > > > >>>>> > > :
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >> root at devuan:~/Desktop/libvirt/build# sudo
> >> ./run
> >> > > > >>>>> > > src/virtlockd
> >> > > > >>>>> > > > >>> & sudo
> >> > > > >>>>> > > > >>> > > > >> ./run src/virtlogd & sudo ./run
> >> src/libvirtd
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >> 2023-08-22 19:38:49.036+0000: 15002: info :
> >> > > libvirt
> >> > > > >>>>> version:
> >> > > > >>>>> > > > >>> 9.7.0
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >> hostname: devuan
> >> > > > >>>>> > > > >>> > > > >> error : virPidFileAcquirePathFull:409 :
> >> Failed
> >> > > to
> >> > > > >>>>> acquire
> >> > > > >>>>> > > pid
> >> > > > >>>>> > > > >>> file
> >> > > > >>>>> > > > >>> > > > >>
> >> '/root/libvirt_build/var/run/virtlockd.pid':
> >> > > > >>>>> Resource
> >> > > > >>>>> > > > >>> temporarily
> >> > > > >>>>> > > > >>> > > > >> unavailable
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >> On Tue, Aug 22, 2023 at 7:01 PM Mario
> >> Marietto <
> >> > > > >>>>> > > > >>> > > marietto2008 at gmail.com>
> >> > > > >>>>> > > > >>> > > > >> wrote:
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >>> Et voila'. I've recompiled libvirt in
> >> this way
> >> > > :
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>> git clone
> >> > > https://github.com/libvirt/libvirt.git
> >> > > > >>>>> > > > >>> > > > >>> mkdir -p libvirt_build
> >> > > > >>>>> > > > >>> > > > >>> cd libvirt
> >> > > > >>>>> > > > >>> > > > >>> apt install meson xsltproc libgnutls28-dev
> >> > > > >>>>> libxml2-dev
> >> > > > >>>>> > > rst2pdf
> >> > > > >>>>> > > > >>> > > > >>> meson build --prefix=$HOME/libvirt_build
> >> > > > >>>>> > > > >>> > > > >>> ninja -C build
> >> > > > >>>>> > > > >>> > > > >>> sudo ninja -C build install
> >> > > > >>>>> > > > >>> > > > >>> cd build
> >> > > > >>>>> > > > >>> > > > >>> nano vai.sh :
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>> sudo ./run src/virtlockd & sudo ./run
> >> > > src/virtlogd
> >> > > > >>>>> & sudo
> >> > > > >>>>> > > ./run
> >> > > > >>>>> > > > >>> > > > >>> src/libvirtd
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>> chmod +x vai.sh
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>> this is the error I get :
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>> root at devuan:~/Desktop/libvirt/build#
> >> ./vai.sh
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.416+0000: 14725: info
> >> :
> >> > > libvirt
> >> > > > >>>>> > > version:
> >> > > > >>>>> > > > >>> 9.7.0
> >> > > > >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.416+0000: 14725: info
> >> :
> >> > > > >>>>> hostname:
> >> > > > >>>>> > > devuan
> >> > > > >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.416+0000: 14725:
> >> error :
> >> > > > >>>>> > > > >>> > > > >>> virFirewallApplyRuleDirect:518 : internal
> >> > > error:
> >> > > > >>>>> Failed to
> >> > > > >>>>> > > > >>> apply
> >> > > > >>>>> > > > >>> > > > >>> firewall rules /usr/sbin/iptables -w
> >> --table
> >> > > filter
> >> > > > >>>>> > > > >>> --list-rules:
> >> > > > >>>>> > > > >>> > > > >>> iptables: Failed to initialize nft:
> >> Protocol
> >> > > not
> >> > > > >>>>> supported
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>> 2023-08-22 16:52:34.428+0000: 14725:
> >> error :
> >> > > > >>>>> > > > >>> > > > >>> virFirewallApplyRuleDirect:518 : internal
> >> > > error:
> >> > > > >>>>> Failed to
> >> > > > >>>>> > > > >>> apply
> >> > > > >>>>> > > > >>> > > firewall
> >> > > > >>>>> > > > >>> > > > >>> rules /usr/sbin/ip6tables -w --table
> >> filter
> >> > > > >>>>> --list-rules:
> >> > > > >>>>> > > > >>> ip6tables:
> >> > > > >>>>> > > > >>> > > Failed
> >> > > > >>>>> > > > >>> > > > >>> to initialize nft: Protocol not supported
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>> On Tue, Aug 22, 2023 at 6:49 PM Pavel
> >> Hrdina <
> >> > > > >>>>> > > > >>> phrdina at redhat.com>
> >> > > > >>>>> > > > >>> > > wrote:
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> On Tue, Aug 22, 2023 at 06:22:25PM +0200,
> >> > > Mario
> >> > > > >>>>> Marietto
> >> > > > >>>>> > > > >>> wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > In your opinion should I remove
> >> virt-manager
> >> > > > >>>>> and all its
> >> > > > >>>>> > > > >>> > > dependencies
> >> > > > >>>>> > > > >>> > > > >>>> > before launching the recompilation ?
> >> > > > >>>>> > > > >>> > > > >>>>
> >> > > > >>>>> > > > >>> > > > >>>> I would say there is no need to do that
> >> if you
> >> > > > >>>>> install
> >> > > > >>>>> > > > >>> libvirt to
> >> > > > >>>>> > > > >>> > > > >>>> /usr/local as it should be separated
> >> from the
> >> > > > >>>>> libvirt
> >> > > > >>>>> > > > >>> installed by
> >> > > > >>>>> > > > >>> > > > >>>> package manager.
> >> > > > >>>>> > > > >>> > > > >>>>
> >> > > > >>>>> > > > >>> > > > >>>> Pavel
> >> > > > >>>>> > > > >>> > > > >>>>
> >> > > > >>>>> > > > >>> > > > >>>> >
> >> > > > >>>>> > > > >>> > > > >>>> > On Tue, Aug 22, 2023 at 6:05 PM Pavel
> >> > > Hrdina <
> >> > > > >>>>> > > > >>> phrdina at redhat.com>
> >> > > > >>>>> > > > >>> > > > >>>> wrote:
> >> > > > >>>>> > > > >>> > > > >>>> >
> >> > > > >>>>> > > > >>> > > > >>>> > > On Tue, Aug 22, 2023 at 05:55:30PM
> >> +0200,
> >> > > > >>>>> Mario
> >> > > > >>>>> > > Marietto
> >> > > > >>>>> > > > >>> wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > > I have installed virt-manager and
> >> all
> >> > > its
> >> > > > >>>>> > > dependencies
> >> > > > >>>>> > > > >>> > > grabbing
> >> > > > >>>>> > > > >>> > > > >>>> the files
> >> > > > >>>>> > > > >>> > > > >>>> > > > from the devuan 5 repository.
> >> > > > >>>>> > > > >>> > > > >>>> > > > To recompile libvirt I need to
> >> acquire
> >> > > some
> >> > > > >>>>> basic
> >> > > > >>>>> > > > >>> information.
> >> > > > >>>>> > > > >>> > > > >>>> Which
> >> > > > >>>>> > > > >>> > > > >>>> > > > version should I compile ? Where
> >> is the
> >> > > > >>>>> source code
> >> > > > >>>>> > > > >>> located ?
> >> > > > >>>>> > > > >>> > > Do
> >> > > > >>>>> > > > >>> > > > >>>> you have
> >> > > > >>>>> > > > >>> > > > >>>> > > > some tutorial that explains the
> >> > > necessary
> >> > > > >>>>> steps to
> >> > > > >>>>> > > do
> >> > > > >>>>> > > > >>> it ?
> >> > > > >>>>> > > > >>> > > thanks.
> >> > > > >>>>> > > > >>> > > > >>>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > Everything can be found at
> >> > > > >>>>> https://libvirt.org/ not
> >> > > > >>>>> > > sure
> >> > > > >>>>> > > > >>> which
> >> > > > >>>>> > > > >>> > > > >>>> version
> >> > > > >>>>> > > > >>> > > > >>>> > > to pick, you can try latest upstream
> >> > > version
> >> > > > >>>>> but there
> >> > > > >>>>> > > > >>> might be
> >> > > > >>>>> > > > >>> > > some
> >> > > > >>>>> > > > >>> > > > >>>> > > dependencies missing in Devuan, if
> >> that
> >> > > > >>>>> happens you
> >> > > > >>>>> > > can
> >> > > > >>>>> > > > >>> > > fallback to
> >> > > > >>>>> > > > >>> > > > >>>> > > version that is provided by Devuan.
> >> > > > >>>>> > > > >>> > > > >>>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > For example this link has basic info
> >> on
> >> > > how
> >> > > > >>>>> to compile
> >> > > > >>>>> > > > >>> libvirt
> >> > > > >>>>> > > > >>> > > > >>>> > > https://libvirt.org/compiling.html
> >> and
> >> > > here
> >> > > > >>>>> you can
> >> > > > >>>>> > > find
> >> > > > >>>>> > > > >>> > > sources
> >> > > > >>>>> > > > >>> > > > >>>> > > to libvirt
> >> > > https://libvirt.org/downloads.html
> >> > > > >>>>> .
> >> > > > >>>>> > > > >>> > > > >>>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > Pavel
> >> > > > >>>>> > > > >>> > > > >>>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > On Tue, Aug 22, 2023 at 5:50 PM
> >> Pavel
> >> > > > >>>>> Hrdina <
> >> > > > >>>>> > > > >>> > > phrdina at redhat.com>
> >> > > > >>>>> > > > >>> > > > >>>> wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > On Tue, Aug 22, 2023 at
> >> 05:28:50PM
> >> > > +0200,
> >> > > > >>>>> Mario
> >> > > > >>>>> > > > >>> Marietto
> >> > > > >>>>> > > > >>> > > wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > root at devuan:~# virsh
> >> > > domcapabilities
> >> > > > >>>>> --machine
> >> > > > >>>>> > > virt
> >> > > > >>>>> > > > >>> > > > >>>> --emulatorbin
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > /usr/bin/qemu-system-arm
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > error: failed to get emulator
> >> > > > >>>>> capabilities
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > error: KVM is not supported on
> >> this
> >> > > > >>>>> platform:
> >> > > > >>>>> > > > >>> Function not
> >> > > > >>>>> > > > >>> > > > >>>> > > implemented
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > BUT it's not true :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > root at devuan:~# kvm-ok
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > INFO: /dev/kvm exists
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > KVM acceleration can be used
> >> > > > >>>>> > > > >>> > > > >>>> > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > Are you using libvirt installed
> >> using
> >> > > > >>>>> package
> >> > > > >>>>> > > manager
> >> > > > >>>>> > > > >>> or
> >> > > > >>>>> > > > >>> > > some
> >> > > > >>>>> > > > >>> > > > >>>> libvirt
> >> > > > >>>>> > > > >>> > > > >>>> > > > > that you compiled yorself?
> >> Checking
> >> > > > >>>>> libvirt code
> >> > > > >>>>> > > this
> >> > > > >>>>> > > > >>> error
> >> > > > >>>>> > > > >>> > > only
> >> > > > >>>>> > > > >>> > > > >>>> > > happens
> >> > > > >>>>> > > > >>> > > > >>>> > > > > if libvirt was compiled without
> >> KVM,
> >> > > more
> >> > > > >>>>> > > > >>> specifically if
> >> > > > >>>>> > > > >>> > > header
> >> > > > >>>>> > > > >>> > > > >>>> > > > > `/usr/include/linux/kvm.h`
> >> doesn't
> >> > > exists.
> >> > > > >>>>> > > > >>> > > > >>>> > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > I was not able to find any
> >> details on
> >> > > > >>>>> Devuan
> >> > > > >>>>> > > distro
> >> > > > >>>>> > > > >>> so not
> >> > > > >>>>> > > > >>> > > sure
> >> > > > >>>>> > > > >>> > > > >>>> how
> >> > > > >>>>> > > > >>> > > > >>>> > > > > the libvirt package is compiled.
> >> You
> >> > > > >>>>> might need
> >> > > > >>>>> > > to try
> >> > > > >>>>> > > > >>> > > compiling
> >> > > > >>>>> > > > >>> > > > >>>> > > libvirt
> >> > > > >>>>> > > > >>> > > > >>>> > > > > yourself.
> >> > > > >>>>> > > > >>> > > > >>>> > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > Pavel
> >> > > > >>>>> > > > >>> > > > >>>> > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > On Tue, Aug 22, 2023 at 5:27 PM
> >> > > Mario
> >> > > > >>>>> Marietto <
> >> > > > >>>>> > > > >>> > > > >>>> > > marietto2008 at gmail.com>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > > Oh sorry....
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > > On Tue, Aug 22, 2023 at
> >> 5:26 PM
> >> > > Mario
> >> > > > >>>>> > > Marietto <
> >> > > > >>>>> > > > >>> > > > >>>> > > marietto2008 at gmail.com
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > > wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >> virsh domcapabilities
> >> --machine
> >> > > virt
> >> > > > >>>>> > > > >>> --emulatorbin
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >> /path/to/qemu-system-arm
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >> error: failed to get
> >> emulator
> >> > > > >>>>> capabilities
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >> error: Cannot check QEMU
> >> binary
> >> > > > >>>>> > > > >>> > > /path/to/qemu-system-arm:
> >> > > > >>>>> > > > >>> > > > >>>> No such
> >> > > > >>>>> > > > >>> > > > >>>> > > > > file or
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >> directory
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >> On Tue, Aug 22, 2023 at
> >> 4:49 PM
> >> > > > >>>>> Pavel Hrdina
> >> > > > >>>>> > > <
> >> > > > >>>>> > > > >>> > > > >>>> phrdina at redhat.com>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> On Tue, Aug 22, 2023 at
> >> > > 04:05:09PM
> >> > > > >>>>> +0200,
> >> > > > >>>>> > > Mario
> >> > > > >>>>> > > > >>> > > Marietto
> >> > > > >>>>> > > > >>> > > > >>>> wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > Where does libvirt want
> >> to
> >> > > find
> >> > > > >>>>> those
> >> > > > >>>>> > > files ?
> >> > > > >>>>> > > > >>> since
> >> > > > >>>>> > > > >>> > > the
> >> > > > >>>>> > > > >>> > > > >>>> qemu
> >> > > > >>>>> > > > >>> > > > >>>> > > 5.1
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > installation files have
> >> been
> >> > > > >>>>> placed under
> >> > > > >>>>> > > > >>> /usr/local
> >> > > > >>>>> > > > >>> > > > >>>> during the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > command
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > make install,I have also
> >> > > copied
> >> > > > >>>>> the
> >> > > > >>>>> > > firmware
> >> > > > >>>>> > > > >>> files
> >> > > > >>>>> > > > >>> > > in :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > ls /usr/local/share/AAVMF
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > AAVMF32_CODE.fd
> >> AAVMF_CODE.fd
> >> > > > >>>>> > > > >>> > > > >>>> AAVMF_CODE.snakeoil.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> AAVMF_VARS.ms.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > AAVMF32_VARS.fd
> >> > > AAVMF_CODE.ms.fd
> >> > > > >>>>> > > > >>> AAVMF_VARS.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >> > > AAVMF_VARS.snakeoil.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > but they aren't still
> >> > > recognized.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> Downgrading libvirt would
> >> not
> >> > > help
> >> > > > >>>>> in this
> >> > > > >>>>> > > > >>> specific
> >> > > > >>>>> > > > >>> > > case.
> >> > > > >>>>> > > > >>> > > > >>>> Since
> >> > > > >>>>> > > > >>> > > > >>>> > > > > version
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> 5.2.0 libvirt uses firmware
> >> > > > >>>>> auto-selection.
> >> > > > >>>>> > > > >>> Libvirt is
> >> > > > >>>>> > > > >>> > > > >>>> looking
> >> > > > >>>>> > > > >>> > > > >>>> > > for
> >> > > > >>>>> > > > >>> > > > >>>> > > > > json
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> files describing available
> >> > > > >>>>> firmwares. It is
> >> > > > >>>>> > > > >>> > > documented in
> >> > > > >>>>> > > > >>> > > > >>>> QEMU
> >> > > > >>>>> > > > >>> > > > >>>> > > > > project
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> git repository in
> >> > > > >>>>> > > `docs/interop/firmware.json`,
> >> > > > >>>>> > > > >>> this
> >> > > > >>>>> > > > >>> > > > >>>> specific
> >> > > > >>>>> > > > >>> > > > >>>> > > section
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> describes where the json
> >> files
> >> > > > >>>>> should be
> >> > > > >>>>> > > placed:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> # It is recommended to
> >> create
> >> > > > >>>>> firmware JSON
> >> > > > >>>>> > > > >>> files
> >> > > > >>>>> > > > >>> > > (each
> >> > > > >>>>> > > > >>> > > > >>>> > > containing a
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> # single @Firmware root
> >> element)
> >> > > > >>>>> with a
> >> > > > >>>>> > > > >>> double-digit
> >> > > > >>>>> > > > >>> > > > >>>> prefix, for
> >> > > > >>>>> > > > >>> > > > >>>> > > > > example
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> # "50-ovmf.json",
> >> > > > >>>>> "50-seabios-256k.json",
> >> > > > >>>>> > > etc,
> >> > > > >>>>> > > > >>> so they
> >> > > > >>>>> > > > >>> > > > >>>> can be
> >> > > > >>>>> > > > >>> > > > >>>> > > sorted
> >> > > > >>>>> > > > >>> > > > >>>> > > > > in
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> # predictable order. The
> >> > > firmware
> >> > > > >>>>> JSON files
> >> > > > >>>>> > > > >>> should be
> >> > > > >>>>> > > > >>> > > > >>>> searched
> >> > > > >>>>> > > > >>> > > > >>>> > > for
> >> > > > >>>>> > > > >>> > > > >>>> > > > > in
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> # three directories:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> # -
> >> /usr/share/qemu/firmware
> >> > > --
> >> > > > >>>>> populated
> >> > > > >>>>> > > by
> >> > > > >>>>> > > > >>> > > > >>>> distro-provided
> >> > > > >>>>> > > > >>> > > > >>>> > > > > firmware
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >> > > > >>>>> packages
> >> > > > >>>>> > > > >>> > > (XDG_DATA_DIRS
> >> > > > >>>>> > > > >>> > > > >>>> covers
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >> > > > >>>>> > > /usr/share by
> >> > > > >>>>> > > > >>> > > default),
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> # - /etc/qemu/firmware --
> >> > > > >>>>> exclusively for
> >> > > > >>>>> > > > >>> sysadmins'
> >> > > > >>>>> > > > >>> > > > >>>> local
> >> > > > >>>>> > > > >>> > > > >>>> > > > > additions,
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> # -
> >> > > > >>>>> $XDG_CONFIG_HOME/qemu/firmware --
> >> > > > >>>>> > > > >>> exclusively
> >> > > > >>>>> > > > >>> > > for
> >> > > > >>>>> > > > >>> > > > >>>> per-user
> >> > > > >>>>> > > > >>> > > > >>>> > > > > local
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >> > > > >>>>> > > > >>> additions
> >> > > > >>>>> > > > >>> > > > >>>> > > (XDG_CONFIG_HOME
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> #
> >> > > > >>>>> > > > >>> defaults to
> >> > > > >>>>> > > > >>> > > > >>>> > > $HOME/.config).
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> It doesn't matter where the
> >> > > *CODE*
> >> > > > >>>>> and
> >> > > > >>>>> > > *VARS*
> >> > > > >>>>> > > > >>> firmware
> >> > > > >>>>> > > > >>> > > > >>>> files are
> >> > > > >>>>> > > > >>> > > > >>>> > > > > placed
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> if the path to these files
> >> is
> >> > > > >>>>> correct in the
> >> > > > >>>>> > > > >>> json
> >> > > > >>>>> > > > >>> > > files
> >> > > > >>>>> > > > >>> > > > >>>> in one
> >> > > > >>>>> > > > >>> > > > >>>> > > of the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> three directories.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> Looking at the qemu-efi-arm
> >> > > package
> >> > > > >>>>> it
> >> > > > >>>>> > > should
> >> > > > >>>>> > > > >>> install
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > /usr/share/AAVMF/AAVMF32_CODE.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > /usr/share/AAVMF/AAVMF32_VARS.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > /usr/share/qemu/firmware/60-edk2-arm.json
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> and that should be picked
> >> up
> >> > > > >>>>> correctly by
> >> > > > >>>>> > > > >>> libvirt.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> I don't know what machine
> >> types
> >> > > are
> >> > > > >>>>> > > available
> >> > > > >>>>> > > > >>> for
> >> > > > >>>>> > > > >>> > > 32bit
> >> > > > >>>>> > > > >>> > > > >>>> ARM, but
> >> > > > >>>>> > > > >>> > > > >>>> > > you
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> should be able to figure
> >> that
> >> > > out by
> >> > > > >>>>> > > running:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> virsh capabilities |
> >> grep
> >> > > > >>>>> canonical
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> it will show only lines
> >> with
> >> > > > >>>>> machine types,
> >> > > > >>>>> > > but
> >> > > > >>>>> > > > >>> my
> >> > > > >>>>> > > > >>> > > guess
> >> > > > >>>>> > > > >>> > > > >>>> is on
> >> > > > >>>>> > > > >>> > > > >>>> > > arm
> >> > > > >>>>> > > > >>> > > > >>>> > > > > there
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> should be 'virt' machine
> >> type so
> >> > > > >>>>> running
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> virsh domcapabilities
> >> > > --machine
> >> > > > >>>>> virt
> >> > > > >>>>> > > > >>> --emulatorbin
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> /path/to/qemu-system-arm
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> where you should be able
> >> to see
> >> > > the
> >> > > > >>>>> firmware
> >> > > > >>>>> > > > >>> paths if
> >> > > > >>>>> > > > >>> > > > >>>> they are
> >> > > > >>>>> > > > >>> > > > >>>> > > > > correctly
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> detected by libvirt.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> Pavel
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > On Tue, Aug 22, 2023 at
> >> > > 3:55 PM
> >> > > > >>>>> Mario
> >> > > > >>>>> > > > >>> Marietto <
> >> > > > >>>>> > > > >>> > > > >>>> > > > > marietto2008 at gmail.com
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > I've already did that :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > # apt install
> >> qemu-efi-arm
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Reading package
> >> lists...
> >> > > Done
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Building dependency
> >> tree...
> >> > > Done
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Reading state
> >> information...
> >> > > > >>>>> Done
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu-efi-arm is
> >> already the
> >> > > > >>>>> newest
> >> > > > >>>>> > > version
> >> > > > >>>>> > > > >>> > > > >>>> (2022.11-6).
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu-efi-arm set to
> >> manually
> >> > > > >>>>> installed.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > if I don't get
> >> wrong,that
> >> > > > >>>>> package do the
> >> > > > >>>>> > > > >>> > > installation
> >> > > > >>>>> > > > >>> > > > >>>> of the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> following
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > files :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > root at devuan
> >> > > :/usr/share/AAVMF#
> >> > > > >>>>> ls
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > AAVMF32_CODE.fd
> >> > > AAVMF_CODE.fd
> >> > > > >>>>> > > > >>> > > > >>>> AAVMF_CODE.snakeoil.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > AAVMF_VARS.ms.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > AAVMF32_VARS.fd
> >> > > > >>>>> AAVMF_CODE.ms.fd
> >> > > > >>>>> > > > >>> AAVMF_VARS.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > AAVMF_VARS.snakeoil.fd
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > in my case they have
> >> been
> >> > > > >>>>> correctly
> >> > > > >>>>> > > placed
> >> > > > >>>>> > > > >>> under
> >> > > > >>>>> > > > >>> > > > >>>> > > /usr/share/AAVMF
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > I'm not sure that the
> >> > > problem
> >> > > > >>>>> is there.
> >> > > > >>>>> > > The
> >> > > > >>>>> > > > >>> error
> >> > > > >>>>> > > > >>> > > > >>>> message
> >> > > > >>>>> > > > >>> > > > >>>> > > talks
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> about the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > libvirt version that
> >> could
> >> > > be
> >> > > > >>>>> wrong.
> >> > > > >>>>> > > What
> >> > > > >>>>> > > > >>> about
> >> > > > >>>>> > > > >>> > > if I
> >> > > > >>>>> > > > >>> > > > >>>> > > retrocede
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> libirt 7.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > to 6.9 for example.
> >> Why 6.9
> >> > > ?
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > As you can read
> >> below,it
> >> > > > >>>>> supports qemu
> >> > > > >>>>> > > 5.0
> >> > > > >>>>> > > > >>> and
> >> > > > >>>>> > > > >>> > > > >>>> newer...
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > v6.9.0 (2020-11-02)
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > *New features*
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > nodedev: Add
> >> support
> >> > > for
> >> > > > >>>>> channel
> >> > > > >>>>> > > > >>> subsystem
> >> > > > >>>>> > > > >>> > > (CSS)
> >> > > > >>>>> > > > >>> > > > >>>> > > devices on
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> S390
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > A CSS device is
> >> > > > >>>>> represented as a
> >> > > > >>>>> > > > >>> parent
> >> > > > >>>>> > > > >>> > > device
> >> > > > >>>>> > > > >>> > > > >>>> of a CCW
> >> > > > >>>>> > > > >>> > > > >>>> > > > > device.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > This support
> >> allows to
> >> > > > >>>>> create
> >> > > > >>>>> > > vfio-ccw
> >> > > > >>>>> > > > >>> > > mediated
> >> > > > >>>>> > > > >>> > > > >>>> devices
> >> > > > >>>>> > > > >>> > > > >>>> > > > > with
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > virNodeDeviceCreateXML().
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Implement
> >> memory
> >> > > > >>>>> failure
> >> > > > >>>>> > > event
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > New event is
> >> > > implemented
> >> > > > >>>>> that is
> >> > > > >>>>> > > > >>> emitted
> >> > > > >>>>> > > > >>> > > > >>>> whenever a
> >> > > > >>>>> > > > >>> > > > >>>> > > guest
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > encounters a
> >> memory
> >> > > > >>>>> failure.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Implement
> >> > > support
> >> > > > >>>>> for
> >> > > > >>>>> > > > >>> <transient/>
> >> > > > >>>>> > > > >>> > > disks
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > VMs based on the
> >> QEMU
> >> > > > >>>>> hypervisor
> >> > > > >>>>> > > now
> >> > > > >>>>> > > > >>> can use
> >> > > > >>>>> > > > >>> > > > >>>> > > <transient/>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> option
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > for local
> >> file-backed
> >> > > > >>>>> disks to
> >> > > > >>>>> > > > >>> configure a
> >> > > > >>>>> > > > >>> > > disk
> >> > > > >>>>> > > > >>> > > > >>>> which
> >> > > > >>>>> > > > >>> > > > >>>> > > > > discards
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> changes made
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > to it while the
> >> VM was
> >> > > > >>>>> active.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > hyperv:
> >> implement new
> >> > > APIs
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > The
> >> > > > >>>>> virConnectGetCapabilities(),
> >> > > > >>>>> > > > >>> > > > >>>> > > virConnectGetMaxVcpus(),
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > virConnectGetVersion(),
> >> > > > >>>>> > > > >>> > > virDomainGetAutostart(),
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > virDomainSetAutostart(),
> >> > > > >>>>> > > > >>> > > virNodeGetFreeMemory(),
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> virDomainReboot(),
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > virDomainReset(),
> >> > > > >>>>> > > > >>> virDomainShutdown(), and
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> virDomainShutdownFlags()
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > APIs have been
> >> > > > >>>>> implemented in the
> >> > > > >>>>> > > > >>> Hyper-V
> >> > > > >>>>> > > > >>> > > > >>>> driver.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > bhyve: implement
> >> > > virtio-9p
> >> > > > >>>>> > > filesystem
> >> > > > >>>>> > > > >>> > > support
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Implement
> >> virito-9p
> >> > > shared
> >> > > > >>>>> > > filesystem
> >> > > > >>>>> > > > >>> using
> >> > > > >>>>> > > > >>> > > the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > <filesystem/>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > element.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Add
> >> support for
> >> > > > >>>>> vDPA network
> >> > > > >>>>> > > > >>> devices.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > VMs using the
> >> QEMU
> >> > > > >>>>> hypervisor can
> >> > > > >>>>> > > now
> >> > > > >>>>> > > > >>> > > specify
> >> > > > >>>>> > > > >>> > > > >>>> vDPA
> >> > > > >>>>> > > > >>> > > > >>>> > > network
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> devices
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > using <interface
> >> > > > >>>>> type='vdpa'>. The
> >> > > > >>>>> > > > >>> node
> >> > > > >>>>> > > > >>> > > device
> >> > > > >>>>> > > > >>> > > > >>>> APIs
> >> > > > >>>>> > > > >>> > > > >>>> > > also
> >> > > > >>>>> > > > >>> > > > >>>> > > > > now
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> list
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > and provide XML
> >> > > > >>>>> descriptions for
> >> > > > >>>>> > > vDPA
> >> > > > >>>>> > > > >>> > > devices.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > cpu_map: Add
> >> EPYC-Rome
> >> > > > >>>>> CPU model
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > *It's supported
> >> in
> >> > > QEMU
> >> > > > >>>>> 5.0.0 and
> >> > > > >>>>> > > > >>> newer.*
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > cpu: Add a flag
> >> for
> >> > > XML
> >> > > > >>>>> > > validation in
> >> > > > >>>>> > > > >>> CPU
> >> > > > >>>>> > > > >>> > > > >>>> comparison
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > The
> >> > > virConnectCompareCPU
> >> > > > >>>>> and
> >> > > > >>>>> > > > >>> > > > >>>> > > virConnectCompareHypervisorCPU
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> API now
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > support the
> >> > > > >>>>> > > > >>> > > > >>>> VIR_CONNECT_COMPARE_CPU_VALIDATE_XML
> >> flag,
> >> > > > >>>>> > > > >>> > > > >>>> > > > > which
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > enables XML
> >> > > validation.
> >> > > > >>>>> For virsh,
> >> > > > >>>>> > > > >>> this
> >> > > > >>>>> > > > >>> > > feature
> >> > > > >>>>> > > > >>> > > > >>>> is
> >> > > > >>>>> > > > >>> > > > >>>> > > enabled
> >> > > > >>>>> > > > >>> > > > >>>> > > > > by
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> passing the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > --validate
> >> option to
> >> > > the
> >> > > > >>>>> > > cpu-compare
> >> > > > >>>>> > > > >>> and
> >> > > > >>>>> > > > >>> > > > >>>> > > > > hypervisor-cpu-compare
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > subcommands.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Introduce
> >> > > > >>>>> virtio-balloon
> >> > > > >>>>> > > free
> >> > > > >>>>> > > > >>> page
> >> > > > >>>>> > > > >>> > > > >>>> reporting
> >> > > > >>>>> > > > >>> > > > >>>> > > feature
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Introduce the
> >> optional
> >> > > > >>>>> attribute
> >> > > > >>>>> > > > >>> > > > >>>> free-page-reporting
> >> > > > >>>>> > > > >>> > > > >>>> > > for
> >> > > > >>>>> > > > >>> > > > >>>> > > > > virtio
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > memballoon
> >> device. It
> >> > > > >>>>> > > > >>> enables/disables the
> >> > > > >>>>> > > > >>> > > > >>>> ability of
> >> > > > >>>>> > > > >>> > > > >>>> > > the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > QEMU
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> virtio
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > memory balloon to
> >> > > return
> >> > > > >>>>> unused
> >> > > > >>>>> > > pages
> >> > > > >>>>> > > > >>> back
> >> > > > >>>>> > > > >>> > > to
> >> > > > >>>>> > > > >>> > > > >>>> the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > hypervisor.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> QEMU 5.1 and
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > newer support
> >> this
> >> > > > >>>>> feature.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > *Improvements*
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Make
> >> 'cbitpos' &
> >> > > > >>>>> > > > >>> 'reducedPhysBits'
> >> > > > >>>>> > > > >>> > > attrs
> >> > > > >>>>> > > > >>> > > > >>>> optional
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Libvirt probes
> >> the
> >> > > > >>>>> underlying
> >> > > > >>>>> > > > >>> platform in
> >> > > > >>>>> > > > >>> > > order
> >> > > > >>>>> > > > >>> > > > >>>> to
> >> > > > >>>>> > > > >>> > > > >>>> > > fill in
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> these
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > SEV attributes
> >> > > > >>>>> automatically
> >> > > > >>>>> > > before
> >> > > > >>>>> > > > >>> > > launching a
> >> > > > >>>>> > > > >>> > > > >>>> guest.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > util: support
> >> device
> >> > > stats
> >> > > > >>>>> > > collection
> >> > > > >>>>> > > > >>> for
> >> > > > >>>>> > > > >>> > > > >>>> SR-IOV VF
> >> > > > >>>>> > > > >>> > > > >>>> > > hostdev
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > For SR-IOV VF
> >> > > hostdevs,
> >> > > > >>>>> libvirt
> >> > > > >>>>> > > now
> >> > > > >>>>> > > > >>> supports
> >> > > > >>>>> > > > >>> > > > >>>> retrieving
> >> > > > >>>>> > > > >>> > > > >>>> > > > > device
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > traffic stats
> >> via the
> >> > > > >>>>> > > > >>> > > virDomainInterfaceStats
> >> > > > >>>>> > > > >>> > > > >>>> API and
> >> > > > >>>>> > > > >>> > > > >>>> > > virsh
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > domifstat.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > logging: Allow
> >> > > disabling
> >> > > > >>>>> log
> >> > > > >>>>> > > rollover
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Set max_len=0 in
> >> > > > >>>>> virtlogd.conf to
> >> > > > >>>>> > > > >>> disable
> >> > > > >>>>> > > > >>> > > log
> >> > > > >>>>> > > > >>> > > > >>>> rollover.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: Set noqueue
> >> > > qdisc
> >> > > > >>>>> for TAP
> >> > > > >>>>> > > > >>> devices
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Set noqueue
> >> instead of
> >> > > > >>>>> the former
> >> > > > >>>>> > > > >>> pfifo_fast
> >> > > > >>>>> > > > >>> > > > >>>> queue
> >> > > > >>>>> > > > >>> > > > >>>> > > > > discipline
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> for
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > TAP devices. It
> >> will
> >> > > avoid
> >> > > > >>>>> > > needless
> >> > > > >>>>> > > > >>> cost of
> >> > > > >>>>> > > > >>> > > > >>>> host CPU
> >> > > > >>>>> > > > >>> > > > >>>> > > cycles
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> and thus
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > improve
> >> performance.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > qemu: virtiofs
> >> can be
> >> > > > >>>>> used without
> >> > > > >>>>> > > > >>> NUMA
> >> > > > >>>>> > > > >>> > > nodes
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Virtiofs is
> >> supported
> >> > > for
> >> > > > >>>>> the VM
> >> > > > >>>>> > > > >>> without
> >> > > > >>>>> > > > >>> > > NUMA
> >> > > > >>>>> > > > >>> > > > >>>> nodes but
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> configured
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > with shared
> >> memory.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > *Bug fixes*
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > hyperv: ensure
> >> WQL
> >> > > > >>>>> queries work
> >> > > > >>>>> > > in all
> >> > > > >>>>> > > > >>> > > locales
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Relying on the
> >> > > > >>>>> "Description" field
> >> > > > >>>>> > > > >>> caused
> >> > > > >>>>> > > > >>> > > > >>>> queries to
> >> > > > >>>>> > > > >>> > > > >>>> > > fail
> >> > > > >>>>> > > > >>> > > > >>>> > > > > on
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > non-"en-US"
> >> systems.
> >> > > The
> >> > > > >>>>> queries
> >> > > > >>>>> > > have
> >> > > > >>>>> > > > >>> been
> >> > > > >>>>> > > > >>> > > > >>>> updated to
> >> > > > >>>>> > > > >>> > > > >>>> > > avoid
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> using localized
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > strings.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > -
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > rpc: Fix
> >> > > virt-ssh-helper
> >> > > > >>>>> detection
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > libvirt 6.8.0
> >> failed
> >> > > to
> >> > > > >>>>> correctly
> >> > > > >>>>> > > > >>> detect the
> >> > > > >>>>> > > > >>> > > > >>>> > > availability
> >> > > > >>>>> > > > >>> > > > >>>> > > > > of
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > new
> >> virt-ssh-helper
> >> > > > >>>>> command on the
> >> > > > >>>>> > > > >>> remote
> >> > > > >>>>> > > > >>> > > host,
> >> > > > >>>>> > > > >>> > > > >>>> and
> >> > > > >>>>> > > > >>> > > > >>>> > > thus
> >> > > > >>>>> > > > >>> > > > >>>> > > > > always
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > used the fallback
> >> > > > >>>>> instead; this
> >> > > > >>>>> > > has
> >> > > > >>>>> > > > >>> now been
> >> > > > >>>>> > > > >>> > > > >>>> fixed.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > What do you think ?
> >> Can you
> >> > > > >>>>> share some
> >> > > > >>>>> > > > >>> > > documentation
> >> > > > >>>>> > > > >>> > > > >>>> about
> >> > > > >>>>> > > > >>> > > > >>>> > > how to
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > recompile an older
> >> version
> >> > > of
> >> > > > >>>>> libvirt
> >> > > > >>>>> > > from
> >> > > > >>>>> > > > >>> source
> >> > > > >>>>> > > > >>> > > > >>>> code ?
> >> > > > >>>>> > > > >>> > > > >>>> > > thanks.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > On Tue, Aug 22, 2023 at
> >> > > 3:35 PM
> >> > > > >>>>> Pavel
> >> > > > >>>>> > > > >>> Hrdina <
> >> > > > >>>>> > > > >>> > > > >>>> > > phrdina at redhat.com
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> On Tue, Aug 22, 2023
> >> at
> >> > > > >>>>> 02:49:05PM
> >> > > > >>>>> > > +0200,
> >> > > > >>>>> > > > >>> Mario
> >> > > > >>>>> > > > >>> > > > >>>> Marietto
> >> > > > >>>>> > > > >>> > > > >>>> > > wrote:
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Hello to everyone.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > I'm trying to use
> >> qemu
> >> > > 5.1
> >> > > > >>>>> with
> >> > > > >>>>> > > > >>> virt-manager
> >> > > > >>>>> > > > >>> > > and
> >> > > > >>>>> > > > >>> > > > >>>> libvirt
> >> > > > >>>>> > > > >>> > > > >>>> > > on
> >> > > > >>>>> > > > >>> > > > >>>> > > > > my ARM
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > chromebook (armhf
> >> 32 bit
> >> > > > >>>>> cpu) running
> >> > > > >>>>> > > > >>> with
> >> > > > >>>>> > > > >>> > > Devuan
> >> > > > >>>>> > > > >>> > > > >>>> 4 as
> >> > > > >>>>> > > > >>> > > > >>>> > > host
> >> > > > >>>>> > > > >>> > > > >>>> > > > > o.s.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > By default it uses
> >> qemu
> >> > > and
> >> > > > >>>>> its
> >> > > > >>>>> > > > >>> > > > >>>> dependencies,version 5.2.
> >> > > > >>>>> > > > >>> > > > >>>> > > I
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> remember
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> that I
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > can't use qemu
> >> > > 5.2,because
> >> > > > >>>>> it doesn't
> >> > > > >>>>> > > > >>> have any
> >> > > > >>>>> > > > >>> > > > >>>> support for
> >> > > > >>>>> > > > >>> > > > >>>> > > > > KVM as
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> you
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> can
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > read here :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > >
> >> > > > >>>>> > > > >>> > >
> >> > > > >>>>> > >
> >> > > > >>>>>
> >> > > https://lists.gnu.org/archive/html/qemu-devel/2020-09/msg02074.html
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > For this reason,I've
> >> > > > >>>>> compiled qemu
> >> > > > >>>>> > > 5.1
> >> > > > >>>>> > > > >>> from
> >> > > > >>>>> > > > >>> > > > >>>> source. Below
> >> > > > >>>>> > > > >>> > > > >>>> > > I
> >> > > > >>>>> > > > >>> > > > >>>> > > > > shown
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> how I
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > have configured
> >> > > everything
> >> > > > >>>>> such as a
> >> > > > >>>>> > > > >>> little
> >> > > > >>>>> > > > >>> > > piece
> >> > > > >>>>> > > > >>> > > > >>>> of
> >> > > > >>>>> > > > >>> > > > >>>> > > > > compilation
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> messages :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # apt install
> >> > > libgtk-3-dev
> >> > > > >>>>> > > libpulse-dev
> >> > > > >>>>> > > > >>> > > libgbm-dev
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> libspice-protocol-dev
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > libspice-server-dev
> >> > > > >>>>> libusb-1.0-0-dev
> >> > > > >>>>> > > > >>> > > libepoxy-dev
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # cp
> >> > > > >>>>> > > > >>> > > > >>>>
> >> > > > >>>>> /root/Desktop/qemu-v5.1.0/arm-softmmu/qemu-system-arm
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> /usr/bin
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # CFLAGS=-Wno-error
> >> > > > >>>>> ./configure
> >> > > > >>>>> > > > >>> > > > >>>> > > --target-list=x86_64-softmmu
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> --enable-opengl
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > --enable-gtk
> >> --enable-kvm
> >> > > > >>>>> > > > >>> --enable-guest-agent
> >> > > > >>>>> > > > >>> > > > >>>> > > --enable-spice
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> --audio-drv-
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > list="oss pa"
> >> > > --enable-libusb
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > A little piece of
> >> the log
> >> > > > >>>>> messages
> >> > > > >>>>> > > that
> >> > > > >>>>> > > > >>> I've
> >> > > > >>>>> > > > >>> > > got
> >> > > > >>>>> > > > >>> > > > >>>> from the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> compilation of
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > qemu 5.1 :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> https://pastebin.ubuntu.com/p/8DYfgPvhXy/
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > These are the
> >> resulting
> >> > > > >>>>> versions of
> >> > > > >>>>> > > my
> >> > > > >>>>> > > > >>> > > frankenstein
> >> > > > >>>>> > > > >>> > > > >>>> > > operation
> >> > > > >>>>> > > > >>> > > > >>>> > > > > :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > # virsh version
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Compiled against
> >> library:
> >> > > > >>>>> libvirt
> >> > > > >>>>> > > 7.0.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using library:
> >> libvirt
> >> > > 7.0.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using API: QEMU
> >> 7.0.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Running hypervisor:
> >> QEMU
> >> > > > >>>>> 5.1.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > At this point I ran
> >> > > > >>>>> virt-manager. It
> >> > > > >>>>> > > has
> >> > > > >>>>> > > > >>> been
> >> > > > >>>>> > > > >>> > > able
> >> > > > >>>>> > > > >>> > > > >>>> to
> >> > > > >>>>> > > > >>> > > > >>>> > > detect
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> qemu,but I
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> get
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > the following error
> >> :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Warning : Failed to
> >> set
> >> > > up
> >> > > > >>>>> UEFI.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > The Libvirt version
> >> does
> >> > > not
> >> > > > >>>>> support
> >> > > > >>>>> > > > >>> UEFI.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Install options are
> >> > > limited.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > (I have also tried
> >> > > upgrading
> >> > > > >>>>> devuan 4
> >> > > > >>>>> > > > >>> with
> >> > > > >>>>> > > > >>> > > devuan
> >> > > > >>>>> > > > >>> > > > >>>> 5 and
> >> > > > >>>>> > > > >>> > > > >>>> > > I've
> >> > > > >>>>> > > > >>> > > > >>>> > > > > got
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> same
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > error :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> You most likely need
> >> to
> >> > > install
> >> > > > >>>>> > > > >>> qemu-efi-arm
> >> > > > >>>>> > > > >>> > > package
> >> > > > >>>>> > > > >>> > > > >>>> which
> >> > > > >>>>> > > > >>> > > > >>>> > > > > should
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> provide 32bit arm
> >> firmware
> >> > > > >>>>> files. The
> >> > > > >>>>> > > > >>> package
> >> > > > >>>>> > > > >>> > > name
> >> > > > >>>>> > > > >>> > > > >>>> is a bit
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> confusing
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> as it doesn't
> >> originate
> >> > > from
> >> > > > >>>>> qemu
> >> > > > >>>>> > > project,
> >> > > > >>>>> > > > >>> it is
> >> > > > >>>>> > > > >>> > > > >>>> from edk2
> >> > > > >>>>> > > > >>> > > > >>>> > > > > project.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> Without this package
> >> > > libvirt
> >> > > > >>>>> most
> >> > > > >>>>> > > likely
> >> > > > >>>>> > > > >>> doesn't
> >> > > > >>>>> > > > >>> > > > >>>> report any
> >> > > > >>>>> > > > >>> > > > >>>> > > efi
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> files
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> and that's what
> >> causes the
> >> > > > >>>>> error you
> >> > > > >>>>> > > are
> >> > > > >>>>> > > > >>> hitting.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> Pavel
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > root at devuan
> >> :/usr/bin#
> >> > > virsh
> >> > > > >>>>> version
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Compiled against
> >> library:
> >> > > > >>>>> libvirt
> >> > > > >>>>> > > 9.0.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using library:
> >> libvirt
> >> > > 9.0.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using API: QEMU
> >> 9.0.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Running hypervisor:
> >> QEMU
> >> > > > >>>>> 5.1.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > If I change
> >> > > qemu-system-arm
> >> > > > >>>>> vers. 5.1
> >> > > > >>>>> > > > >>> with
> >> > > > >>>>> > > > >>> > > > >>>> qemu-system-arm
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> 5.2,the error
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > disappears. So,it
> >> seems
> >> > > that
> >> > > > >>>>> libvirt
> >> > > > >>>>> > > > >>> does not
> >> > > > >>>>> > > > >>> > > > >>>> accept
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> qemu-system-arm
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> vers.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > 5.1 or maybe any
> >> version
> >> > > > >>>>> lower than
> >> > > > >>>>> > > > >>> 5.2,I don't
> >> > > > >>>>> > > > >>> > > > >>>> know. But
> >> > > > >>>>> > > > >>> > > > >>>> > > as
> >> > > > >>>>> > > > >>> > > > >>>> > > > > I've
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> said,I
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > can't use any
> >> version of
> >> > > qemu
> >> > > > >>>>> > > greater or
> >> > > > >>>>> > > > >>> equal
> >> > > > >>>>> > > > >>> > > to
> >> > > > >>>>> > > > >>> > > > >>>> 5.2 on
> >> > > > >>>>> > > > >>> > > > >>>> > > my
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> setup. And I
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > want to use
> >> virt-manager
> >> > > and
> >> > > > >>>>> libvirt
> >> > > > >>>>> > > > >>> because I
> >> > > > >>>>> > > > >>> > > > >>>> find these
> >> > > > >>>>> > > > >>> > > > >>>> > > > > tools
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> very
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > comfortable instead
> >> of
> >> > > using
> >> > > > >>>>> the
> >> > > > >>>>> > > "raw"
> >> > > > >>>>> > > > >>> qemu
> >> > > > >>>>> > > > >>> > > > >>>> parameters. Is
> >> > > > >>>>> > > > >>> > > > >>>> > > > > there a
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > workaround ? Maybe
> >> I can
> >> > > > >>>>> recompile
> >> > > > >>>>> > > > >>> virt-manager
> >> > > > >>>>> > > > >>> > > > >>>> and / or
> >> > > > >>>>> > > > >>> > > > >>>> > > > > libvirt
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> from
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> the
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > source code ? but
> >> how ?
> >> > > Do
> >> > > > >>>>> you think
> >> > > > >>>>> > > > >>> that it
> >> > > > >>>>> > > > >>> > > could
> >> > > > >>>>> > > > >>> > > > >>>> work
> >> > > > >>>>> > > > >>> > > > >>>> > > if I
> >> > > > >>>>> > > > >>> > > > >>>> > > > > use
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> something
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > like this (if it
> >> exists
> >> > > and
> >> > > > >>>>> if it
> >> > > > >>>>> > > can be
> >> > > > >>>>> > > > >>> > > reached
> >> > > > >>>>> > > > >>> > > > >>>> in some
> >> > > > >>>>> > > > >>> > > > >>>> > > way)
> >> > > > >>>>> > > > >>> > > > >>>> > > > > :
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Compiled against
> >> library:
> >> > > > >>>>> libvirt
> >> > > > >>>>> > > 5.0.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using library:
> >> libvirt
> >> > > 5.0.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Using API: QEMU
> >> 5.0.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Running hypervisor:
> >> QEMU
> >> > > > >>>>> 5.1.0
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > thanks.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > --
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >> > Mario.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > --
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > > Mario.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > --
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>> > Mario.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >> --
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >> Mario.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >>
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > > --
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > > Mario.
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > --
> >> > > > >>>>> > > > >>> > > > >>>> > > > > > Mario.
> >> > > > >>>>> > > > >>> > > > >>>> > > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > >
> >> > > > >>>>> > > > >>> > > > >>>> > > > --
> >> > > > >>>>> > > > >>> > > > >>>> > > > Mario.
> >> > > > >>>>> > > > >>> > > > >>>> > >
> >> > > > >>>>> > > > >>> > > > >>>> >
> >> > > > >>>>> > > > >>> > > > >>>> >
> >> > > > >>>>> > > > >>> > > > >>>> > --
> >> > > > >>>>> > > > >>> > > > >>>> > Mario.
> >> > > > >>>>> > > > >>> > > > >>>>
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>> --
> >> > > > >>>>> > > > >>> > > > >>> Mario.
> >> > > > >>>>> > > > >>> > > > >>>
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >> --
> >> > > > >>>>> > > > >>> > > > >> Mario.
> >> > > > >>>>> > > > >>> > > > >>
> >> > > > >>>>> > > > >>> > > > >
> >> > > > >>>>> > > > >>> > > > >
> >> > > > >>>>> > > > >>> > > > > --
> >> > > > >>>>> > > > >>> > > > > Mario.
> >> > > > >>>>> > > > >>> > > > >
> >> > > > >>>>> > > > >>> > > >
> >> > > > >>>>> > > > >>> > > >
> >> > > > >>>>> > > > >>> > > > --
> >> > > > >>>>> > > > >>> > > > Mario.
> >> > > > >>>>> > > > >>> > >
> >> > > > >>>>> > > > >>> > >
> >> > > > >>>>> > > > >>> > >
> >> > > > >>>>> > > > >>> >
> >> > > > >>>>> > > > >>> > --
> >> > > > >>>>> > > > >>> > Mario.
> >> > > > >>>>> > > > >>>
> >> > > > >>>>> > > > >>
> >> > > > >>>>> > > > >>
> >> > > > >>>>> > > > >> --
> >> > > > >>>>> > > > >> Mario.
> >> > > > >>>>> > > > >>
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > > > --
> >> > > > >>>>> > > > > Mario.
> >> > > > >>>>> > > > >
> >> > > > >>>>> > > >
> >> > > > >>>>> > > >
> >> > > > >>>>> > > > --
> >> > > > >>>>> > > > Mario.
> >> > > > >>>>> > >
> >> > > > >>>>> >
> >> > > > >>>>> >
> >> > > > >>>>> > --
> >> > > > >>>>> > Mario.
> >> > > > >>>>>
> >> > > > >>>>
> >> > > > >>>>
> >> > > > >>>> --
> >> > > > >>>> Mario.
> >> > > > >>>>
> >> > > > >>>
> >> > > > >>>
> >> > > > >>> --
> >> > > > >>> Mario.
> >> > > > >>>
> >> > > > >>
> >> > > > >>
> >> > > > >> --
> >> > > > >> Mario.
> >> > > > >>
> >> > > > >
> >> > > > >
> >> > > > > --
> >> > > > > Mario.
> >> > > > >
> >> > > >
> >> > > >
> >> > > > --
> >> > > > Mario.
> >> > >
> >> >
> >> >
> >> > --
> >> > Mario.
> >>
> >
> >
> > --
> > Mario.
> >
>
>
> --
> Mario.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://listman.redhat.com/archives/virt-tools-list/attachments/20230825/b9ce9414/attachment.sig>
More information about the virt-tools-list
mailing list