[virt-tools-list] Fwd: virt-p2v-image-builder

[Colin Coe]

and include the list....


---------- Forwarded message ----------
From: Colin Coe <colin.coe at gmail.com>
Date: Thu, Jun 16, 2011 at 3:10 PM
Subject: Re: [virt-tools-list] virt-p2v-image-builder
To: "Richard W.M. Jones" <rjones at redhat.com>


Hi Rich

I added crash=600 as well as removing "quiet  rhgb", with no change in
result.  I've so far tried this CD image on a Lenovo laptop, two
different Lenovo desktops, one old (4yrs+) IBM workstation, one HP
xw4600 and one HP 380DL G6 Proliant.

The image was made on Fedora 15 and I've successfully booted Fedora 15
on one of the Lenovo desktops.

I'll try to redirect the console on a machine to the serial port so I
can capture whats going on.

CC


On Wed, Jun 15, 2011 at 5:23 PM, Richard W.M. Jones <rjones at redhat.com> wrote:
> On Wed, Jun 15, 2011 at 01:39:20PM +0800, Colin Coe wrote:
>> Hi all
>>
>> I hope this is the right spot for asking questions on virt-p2v-image-builder....
>>
>> I've downloaded the above from Fedora 15 Testing and created an ISO
>> image.  I've attempted to test this on a laptop and a couple of
>> desktop systems.  In all cases, some errors flash past at the end and
>> the systems turn off.  Is there a option I can pass through ISOLINUX
>> to not reboot at the end so I can post the errors?
>
> You could try adding panic=600 to the boot line.
>
> Rich.
>
> --
> Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
> virt-p2v converts physical machines to virtual machines.  Boot with a
> live CD or over the network (PXE) and turn machines into Xen guests.
> http://et.redhat.com/~rjones/virt-p2v
>



--
RHCE#805007969328369



-- 
RHCE#805007969328369